The PPE 138051010 heavy-duty cast aluminum rear differential cover in the Brushed finish fits 2001-2019 Chevrolet Silverado and GMC Sierra 2500HD/3500HD trucks with the 6.6L Duramax, and 2003-2018 Dodge Ram 2500/3500 (Ram for 2010 and later) trucks with the 5.9L or 6.7L Cummins, when they use the AAM 11.5-inch 14-bolt rear axle. A stamped-steel factory cover leaves gear oil with little volume or surface area to shed heat, which shortens the life of gears, bearings, and limited-slip clutches under towing and heavy load.
This flat-back cover is precision-cast from heat-treated A356.0-T6 aluminum in a permanent steel mold. It adds 0.75 quart of oil capacity, uses half-inch external fins and internal windage scrapers that also form a cross-bracing structure, and includes 304 stainless fill and drain plugs with high-temperature neodymium magnets and Viton O-rings. The fill plug is positioned at the factory fill level.
Key Features & Benefits
- A356.0-T6 Cast Aluminum: Heat-treated alloy improves strength, impact resistance, and thermal conductivity over a stock steel cover.
- 0.75-Quart Extra Capacity and Half-Inch Fins: More oil and added surface area help keep differential temperatures in check.
- Internal Windage Scrapers: Reduce churning, aeration, and parasitic loss while bracing the cover with the external fins.
- Magnetic Stainless Service Plugs: 304 stainless fill and drain plugs with neodymium magnets capture ferrous particles. Viton O-rings seal the plugs.
- Brushed Finish Kit: This is the brushed 138051010 cover. The kit includes a heavy-duty gasket and M8-1.25 x 30 mm socket-head cap screws with washers.
Technical Specifications
- Manufacturer: PPE (Pacific Performance Engineering)
- Part Number: 138051010
- Product Type: Rear Differential Cover
- Material / Finish: A356.0-T6 cast aluminum, Brushed
- Axle: AAM 11.5-inch 14-bolt rear
- Added Oil Capacity: 0.75 quart
- Hardware: (14) M8-1.25 x 30 mm socket-head cap screws and flat washers; 1-inch magnetic fill plug; 3/8-inch magnetic drain plug; 1/8-inch and 1/4-inch NPT plugs
- Truck Compatibility: 2001-2019 GM 2500HD/3500HD and 2003-2018 Ram 2500/3500 with the AAM 11.5-inch 14-bolt rear axle
- Engine Platform: 6.6L Duramax (2001-2019); 5.9L and 6.7L Cummins (2003-2018)
- OEM Reference: GM 12471446, 23445891; Mopar 5086904AD
- Warranty: 1 Year Limited (PPE cast aluminum pans and covers)
Vehicle Fitment & Technical Installation Notes
Fits 2001-2019 Chevrolet Silverado and GMC Sierra 2500HD/3500HD 6.6L Duramax and 2003-2018 Ram 2500/3500 5.9L and 6.7L Cummins trucks with the AAM 11.5-inch 14-bolt rear axle. Official coverage is that axle, including gasoline HD trucks that use it. This cover will not fit trucks with coil-spring rear suspension; PPE specifies part number 238051000 for those applications. It will not fit 11.8-inch or other axle sizes. On some Ram 2500 trucks, confirm the tone ring clears the internal baffles before final tightening. PPE's notice for this family says the baffle cutouts can be extended 0.75 to 1.0 inch toward the driver side if more clearance is needed.
Installation Tip: Remove the brake-line bracket and parking-brake differential brackets and save them. After the stock cover is off, trim the parking-brake bracket by grinding a triangle parallel to the bolt hole and cutting the smaller grip off completely. Clean the housing flange, align the included gasket, reattach the brake-line bracket and the modified parking-brake bracket with the new hardware, then start all cover bolts finger-tight and torque them in a crossing pattern to 20-25 ft-lbs. Fill to the sight level with the manufacturer-recommended gear oil and check for leaks.
The PPE 138051010 heavy-duty cast aluminum rear differential cover in the Brushed finish fits 2001-2019 Chevrolet Silverado and GMC Sierra 2500HD/3500HD trucks with the 6.6L Duramax, and 2003-2018 Dodge Ram 2500/3500 (Ram for 2010 and later) trucks with the 5.9L or 6.7L Cummins, when they use the AAM 11.5-inch 14-bolt rear axle. A stamped-steel factory cover leaves gear oil with little volume or surface area to shed heat, which shortens the life of gears, bearings, and limited-slip clutches under towing and heavy load.
This flat-back cover is precision-cast from heat-treated A356.0-T6 aluminum in a permanent steel mold. It adds 0.75 quart of oil capacity, uses half-inch external fins and internal windage scrapers that also form a cross-bracing structure, and includes 304 stainless fill and drain plugs with high-temperature neodymium magnets and Viton O-rings. The fill plug is positioned at the factory fill level.
Key Features & Benefits
A356.0-T6 Cast Aluminum: Heat-treated alloy improves strength, impact resistance, and thermal conductivity over a stock steel cover.
0.75-Quart Extra Capacity and Half-Inch Fins: More oil and added surface ar[...]
The PPE 138051010 heavy-duty cast aluminum rear differential cover in the Brushed finish fits 2001-2019 Chevrolet Silverado and GMC Sierra 2500HD/3500HD trucks with the 6.6L Duramax, and 2003-2018 Dodge Ram 2500/3500 (Ram for 2010 and later) trucks with the 5.9L or 6.7L Cummins, when they use the AAM 11.5-inch 14-bolt rear axle. A stamped-steel factory cover leaves gear oil with little volume or surface area to shed heat, which shortens the life of gears, bearings, and limited-slip clutches under towing and heavy load.
This flat-back cover is precision-cast from heat-treated A356.0-T6 aluminum in a permanent steel mold. It adds 0.75 quart of oil capacity, uses half-inch external fins and internal windage scrapers that also form a cross-bracing structure, and includes 304 stainless fill and drain plugs with high-temperature neodymium magnets and Viton O-rings. The fill plug is positioned at the factory fill level.
Key Features & Benefits
- A356.0-T6 Cast Aluminum: Heat-treated alloy improves strength, impact resistance, and thermal conductivity over a stock steel cover.
- 0.75-Quart Extra Capacity and Half-Inch Fins: More oil and added surface area help keep differential temperatures in check.
- Internal Windage Scrapers: Reduce churning, aeration, and parasitic loss while bracing the cover with the external fins.
- Magnetic Stainless Service Plugs: 304 stainless fill and drain plugs with neodymium magnets capture ferrous particles. Viton O-rings seal the plugs.
- Brushed Finish Kit: This is the brushed 138051010 cover. The kit includes a heavy-duty gasket and M8-1.25 x 30 mm socket-head cap screws with washers.
Technical Specifications
- Manufacturer: PPE (Pacific Performance Engineering)
- Part Number: 138051010
- Product Type: Rear Differential Cover
- Material / Finish: A356.0-T6 cast aluminum, Brushed
- Axle: AAM 11.5-inch 14-bolt rear
- Added Oil Capacity: 0.75 quart
- Hardware: (14) M8-1.25 x 30 mm socket-head cap screws and flat washers; 1-inch magnetic fill plug; 3/8-inch magnetic drain plug; 1/8-inch and 1/4-inch NPT plugs
- Truck Compatibility: 2001-2019 GM 2500HD/3500HD and 2003-2018 Ram 2500/3500 with the AAM 11.5-inch 14-bolt rear axle
- Engine Platform: 6.6L Duramax (2001-2019); 5.9L and 6.7L Cummins (2003-2018)
- OEM Reference: GM 12471446, 23445891; Mopar 5086904AD
- Warranty: 1 Year Limited (PPE cast aluminum pans and covers)
Vehicle Fitment & Technical Installation Notes
Fits 2001-2019 Chevrolet Silverado and GMC Sierra 2500HD/3500HD 6.6L Duramax and 2003-2018 Ram 2500/3500 5.9L and 6.7L Cummins trucks with the AAM 11.5-inch 14-bolt rear axle. Official coverage is that axle, including gasoline HD trucks that use it. This cover will not fit trucks with coil-spring rear suspension; PPE specifies part number 238051000 for those applications. It will not fit 11.8-inch or other axle sizes. On some Ram 2500 trucks, confirm the tone ring clears the internal baffles before final tightening. PPE's notice for this family says the baffle cutouts can be extended 0.75 to 1.0 inch toward the driver side if more clearance is needed.
Installation Tip: Remove the brake-line bracket and parking-brake differential brackets and save them. After the stock cover is off, trim the parking-brake bracket by grinding a triangle parallel to the bolt hole and cutting the smaller grip off completely. Clean the housing flange, align the included gasket, reattach the brake-line bracket and the modified parking-brake bracket with the new hardware, then start all cover bolts finger-tight and torque them in a crossing pattern to 20-25 ft-lbs. Fill to the sight level with the manufacturer-recommended gear oil and check for leaks.