Your Cart (0)
Thumbnail Filmstrip of 5.9|6.7 Cummins H-Series Coated Rod Bearing (.001" Extra Oil Clearance) Mahle CB-1873HXC Images
When you are pushing your 2003-2018 5.9L or 6.7L Cummins engine to its limits, standard components simply won't cut it. The Mahle CB-1873HXC H-Series Coated Rod Bearing is engineered specifically for high-performance builds demanding the ultimate in reliability. Featuring an extra .001" of oil clearance, these bearings are designed to handle crankshafts with oversize fillets and operate flawlessly in medium to high RPM ranges. If you are uncertain about where to begin with performance upgrades, the H-Series is universally recognized as the ideal starting point. It provides a superior contact pattern that covers the optimal 2/3 to 3/4 of the bearing surface, rectifying the narrow contact patterns often seen with lesser P-Series components.
Choosing the right bearing means understanding what sets premium engineering apart from the competition. Built on the legendary Clevite TriMetal™ design, this rod bearing delivers unmatched technical advantages:
- Superior Seizure Resistance: Engineered to withstand extreme thermal stress, providing up to 40% greater seizure resistance than competing engine bearings.
- Extreme Load Capacity: Built for heavy-duty power, these bearings can endure over 60% higher loads for extended periods compared to standard alternatives.
- Advanced Embedability and Conformability: The precision-engineered thin overlay on a hardened steel back offers a highly forgiving surface, providing vital protection against minor debris and maintenance imperfections.
- Unmatched Durability: Designed to outlast the competition, these bearings far exceed the standard light-vehicle requirement of 150,000 miles, as well as the demanding heavy-duty commercial vehicle standard of 300,000 miles.
It is a proven fact in high-performance engine building that not all tri-metal bearings are created equal. Clevite TriMetal™ technology has remained the industry benchmark since pioneering the original cast, copper, and lead composition decades ago. By choosing the Mahle H-Series, you are investing in a hardened steel backing, a medium level of eccentricity, and a high-crush design that locks perfectly into place. Do not compromise on the backbone of your Cummins engine; demand the highest quality, maximum strength, and original durability that only genuine Clevite Engine Bearings can deliver.
Note: Requires 8 per engine. Sold individually.
When you are pushing your 2003-2018 5.9L or 6.7L Cummins engine to its limits, standard components simply won't cut it. The Mahle CB-1873HXC H-Series Coated Rod Bearing is engineered specifically for high-performance builds demanding the ultimate in reliability. Featuring an extra .001" of oil clearance, these bearings are designed to handle crankshafts with oversize fillets and operate flawlessly in medium to high RPM ranges. If you are uncertain about where to begin with performance upgrades, the H-Series is universally recognized as the ideal starting point. It provides a superior contact pattern that covers the optimal 2/3 to 3/4 of the bearing surface, rectifying the narrow contact patterns often seen with lesser P-Series components.
Choosing the right bearing means understanding what sets premium engineering apart from the competition. Built on the legendary Clevite TriMetal™ design, this rod bearing delivers unmatched technical advantages:
Superior Seizure Resistance: Engineered to withstand extreme thermal stress, providing up to 40% greater seizure resistance than competing engine bearings.
Extreme Load Capacity: Built for heavy-duty power, these bearing[...]
When you are pushing your 2003-2018 5.9L or 6.7L Cummins engine to its limits, standard components simply won't cut it. The Mahle CB-1873HXC H-Series Coated Rod Bearing is engineered specifically for high-performance builds demanding the ultimate in reliability. Featuring an extra .001" of oil clearance, these bearings are designed to handle crankshafts with oversize fillets and operate flawlessly in medium to high RPM ranges. If you are uncertain about where to begin with performance upgrades, the H-Series is universally recognized as the ideal starting point. It provides a superior contact pattern that covers the optimal 2/3 to 3/4 of the bearing surface, rectifying the narrow contact patterns often seen with lesser P-Series components.
Choosing the right bearing means understanding what sets premium engineering apart from the competition. Built on the legendary Clevite TriMetal™ design, this rod bearing delivers unmatched technical advantages:
- Superior Seizure Resistance: Engineered to withstand extreme thermal stress, providing up to 40% greater seizure resistance than competing engine bearings.
- Extreme Load Capacity: Built for heavy-duty power, these bearings can endure over 60% higher loads for extended periods compared to standard alternatives.
- Advanced Embedability and Conformability: The precision-engineered thin overlay on a hardened steel back offers a highly forgiving surface, providing vital protection against minor debris and maintenance imperfections.
- Unmatched Durability: Designed to outlast the competition, these bearings far exceed the standard light-vehicle requirement of 150,000 miles, as well as the demanding heavy-duty commercial vehicle standard of 300,000 miles.
It is a proven fact in high-performance engine building that not all tri-metal bearings are created equal. Clevite TriMetal™ technology has remained the industry benchmark since pioneering the original cast, copper, and lead composition decades ago. By choosing the Mahle H-Series, you are investing in a hardened steel backing, a medium level of eccentricity, and a high-crush design that locks perfectly into place. Do not compromise on the backbone of your Cummins engine; demand the highest quality, maximum strength, and original durability that only genuine Clevite Engine Bearings can deliver.
Note: Requires 8 per engine. Sold individually.