Your Cart (0)
Thumbnail Filmstrip of 6.7 Cummins Dual Heater Upgrade Kit Banks 42830 Images
The Banks 42830 Dual Heater Upgrade Kit is a critical safety and performance enhancement for 2007.5-2024 6.7 Cummins owners who demand reliability in extreme environments. While the factory Cummins grid heater is notorious for failures that can result in catastrophic engine destruction, the Banks coil heaters are engineered with a "fail-safe" design to protect your investment. This simple, maintenance-free bolt-on kit integrates seamlessly with your Dual-Heat Capable Monster-Ram® intake, doubling your heat output from 750 watts to a total of 1500 watts. By upgrading your heating capacity, you are not just improving startability; you are implementing a sophisticated solution that prioritizes engine longevity and operational readiness during the harshest winter months.
- Enhanced Heat Output: Increases total intake heating from 750 watts to 1500 watts to facilitate smoother ignition in sub-zero conditions.
- Extreme Cold Performance: Enables reliable cold starts as low as -30°F (-34°C) when used in conjunction with block heat, and down to -20°F (-29°C) without block heat.
- Safety-First Engineering: Unlike OEM components that can drop debris into the cylinders upon failure, Banks coil heaters are designed to fail safely, preventing internal engine damage.
- Adherence to RAM Guidelines: Designed to support RAM’s recommendation for block heater use at 0°F (-17°C) and the manufacturer mandate for use at -20°F (-29°C) to prevent premature wear on pistons, rings, and cylinder walls.
- Proven Testing: Rigorously validated in controlled climate chambers using two intake air pre-heat cycles, following the procedures outlined in the factory owner’s manual.
- Expanded Capability: Testing indicates that adding a third coil heater for a total of 2,250 watts can achieve successful starts at -30°F (-34°C) even without the assistance of a block heater.
Educational awareness regarding cold-start mechanics is vital for any diesel owner, as intake air temperature is only one factor in a successful start. While the Banks Dual-Heat Upgrade Kit provides the thermal energy necessary to fire the engine in severe weather, users should remain mindful that individual results may vary based on the vehicle’s age and overall mechanical condition. It is important to follow the RAM owner’s manual regarding pre-heat cycles and block heater usage to avoid unnecessary stress on key components like cylinder walls and rings. By choosing the Banks 750-watt upgrade, you are opting for a laboratory-tested system that bridges the gap between factory limitations and the high-output requirements of a hard-working 6.7 Cummins engine.
Note: Battery boosting may be required for sufficient cranking RPM
Includes
- 750 Watt Coil Heater
- Copper Washer
- Heater Coil Extension Wire
The Banks 42830 Dual Heater Upgrade Kit is a critical safety and performance enhancement for 2007.5-2024 6.7 Cummins owners who demand reliability in extreme environments. While the factory Cummins grid heater is notorious for failures that can result in catastrophic engine destruction, the Banks coil heaters are engineered with a "fail-safe" design to protect your investment. This simple, maintenance-free bolt-on kit integrates seamlessly with your Dual-Heat Capable Monster-Ram® intake, doubling your heat output from 750 watts to a total of 1500 watts. By upgrading your heating capacity, you are not just improving startability; you are implementing a sophisticated solution that prioritizes engine longevity and operational readiness during the harshest winter months.
Enhanced Heat Output: Increases total intake heating from 750 watts to 1500 watts to facilitate smoother ignition in sub-zero conditions.
Extreme Cold Performance: Enables reliable cold starts as low as -30°F (-34°C) when used in conjunction with block heat, and down to -20°F (-29°C) without block heat.
Safety-First Engineering: Unlike OEM components that can drop debris into the cylinders upon fa[...]
The Banks 42830 Dual Heater Upgrade Kit is a critical safety and performance enhancement for 2007.5-2024 6.7 Cummins owners who demand reliability in extreme environments. While the factory Cummins grid heater is notorious for failures that can result in catastrophic engine destruction, the Banks coil heaters are engineered with a "fail-safe" design to protect your investment. This simple, maintenance-free bolt-on kit integrates seamlessly with your Dual-Heat Capable Monster-Ram® intake, doubling your heat output from 750 watts to a total of 1500 watts. By upgrading your heating capacity, you are not just improving startability; you are implementing a sophisticated solution that prioritizes engine longevity and operational readiness during the harshest winter months.
- Enhanced Heat Output: Increases total intake heating from 750 watts to 1500 watts to facilitate smoother ignition in sub-zero conditions.
- Extreme Cold Performance: Enables reliable cold starts as low as -30°F (-34°C) when used in conjunction with block heat, and down to -20°F (-29°C) without block heat.
- Safety-First Engineering: Unlike OEM components that can drop debris into the cylinders upon failure, Banks coil heaters are designed to fail safely, preventing internal engine damage.
- Adherence to RAM Guidelines: Designed to support RAM’s recommendation for block heater use at 0°F (-17°C) and the manufacturer mandate for use at -20°F (-29°C) to prevent premature wear on pistons, rings, and cylinder walls.
- Proven Testing: Rigorously validated in controlled climate chambers using two intake air pre-heat cycles, following the procedures outlined in the factory owner’s manual.
- Expanded Capability: Testing indicates that adding a third coil heater for a total of 2,250 watts can achieve successful starts at -30°F (-34°C) even without the assistance of a block heater.
Educational awareness regarding cold-start mechanics is vital for any diesel owner, as intake air temperature is only one factor in a successful start. While the Banks Dual-Heat Upgrade Kit provides the thermal energy necessary to fire the engine in severe weather, users should remain mindful that individual results may vary based on the vehicle’s age and overall mechanical condition. It is important to follow the RAM owner’s manual regarding pre-heat cycles and block heater usage to avoid unnecessary stress on key components like cylinder walls and rings. By choosing the Banks 750-watt upgrade, you are opting for a laboratory-tested system that bridges the gap between factory limitations and the high-output requirements of a hard-working 6.7 Cummins engine.
Note: Battery boosting may be required for sufficient cranking RPM
Includes
- 750 Watt Coil Heater
- Copper Washer
- Heater Coil Extension Wire