Your Cart (0)
Thumbnail Filmstrip of 6.7 Powerstroke Dana M235 10-Bolt Heavy Duty Cast Aluminum Front Differential Cover PPE 338041510 Images
PPE 338041510 Heavy-Duty Cast Aluminum Front Differential Cover (Brushed) for Dana M235 – 2023–2026 Ford Super Duty
Upgrade the strength, cooling, and protection of your 2023–2025 (and compatible 2026) Ford F-250/F-350 Super Duty’s Dana M235 front axle with the PPE Heavy-Duty Cast Aluminum Front Differential Cover (Part #338041510). Designed specifically for the increased demands of the Dana M235, this cover far outperforms the thin stock stamped-steel unit with superior durability, heat management, and lubrication efficiency—ideal for towing, heavy loads, and hard use on 6.7L Powerstroke (and compatible gas) trucks.
Key Benefits
Cast from high-grade A356-T6 heat-treated aluminum, the cover adds rigidity and impact resistance while dramatically improving heat dissipation. Deep external cooling fins increase surface area to keep gear oil cooler and maintain viscosity under stress. Internal windage scrapers/baffles control fluid flow, reduce churning, aeration, and parasitic loss, and promote consistent gear lubrication. The design also increases fluid capacity by approximately 0.5 quart for better thermal capacity. Triangulated gussets reinforce the housing, and magnetic stainless-steel fill/drain plugs capture harmful ferrous particles.
Features
- Robust A356-T6 heat-treated cast aluminum construction for superior strength and cooling vs. stock steel
- External cooling fins that maximize heat dissipation and add structural strength
- Internal fluid windage scrapers that reduce heat, aeration, and power loss while optimizing lubrication
- Triangulated gussets that add rigidity to the gear housing
- High-power neodymium magnet-equipped billet stainless steel fill and drain plugs
- Brushed aluminum finish for a clean, performance look
- Precision fit that replaces the OEM cover (reference: Ford PC3Z4033C)
- Patent pending design
Fitment
Fits 2023–2026 Ford F-250/F-350 Super Duty 4WD models equipped with the Dana M235 14-bolt front axle, including 6.7L Powerstroke diesel as well as compatible 6.8L and 7.3L gas engines. Confirm your axle is the Dana M235 before ordering.
This PPE cover delivers the cooling, capacity, and toughness needed to protect your front differential under real-world heavy-duty conditions. A smart upgrade for Super Duty owners who demand more than the factory cover can provide.
PPE 338041510 Heavy-Duty Cast Aluminum Front Differential Cover (Brushed) for Dana M235 – 2023–2026 Ford Super Duty
Upgrade the strength, cooling, and protection of your 2023–2025 (and compatible 2026) Ford F-250/F-350 Super Duty’s Dana M235 front axle with the PPE Heavy-Duty Cast Aluminum Front Differential Cover (Part #338041510). Designed specifically for the increased demands of the Dana M235, this cover far outperforms the thin stock stamped-steel unit with superior durability, heat management, and lubrication efficiency—ideal for towing, heavy loads, and hard use on 6.7L Powerstroke (and compatible gas) trucks.
Key Benefits
Cast from high-grade A356-T6 heat-treated aluminum, the cover adds rigidity and impact resistance while dramatically improving heat dissipation. Deep external cooling fins increase surface area to keep gear oil cooler and maintain viscosity under stress. Internal windage scrapers/baffles control fluid flow, reduce churning, aeration, and parasitic loss, and promote consistent gear lubrication. The design also increases fluid capacity by approximately 0.5 quart for better thermal capacity. Triangulated gussets reinforce the housing, and m[...]
PPE 338041510 Heavy-Duty Cast Aluminum Front Differential Cover (Brushed) for Dana M235 – 2023–2026 Ford Super Duty
Upgrade the strength, cooling, and protection of your 2023–2025 (and compatible 2026) Ford F-250/F-350 Super Duty’s Dana M235 front axle with the PPE Heavy-Duty Cast Aluminum Front Differential Cover (Part #338041510). Designed specifically for the increased demands of the Dana M235, this cover far outperforms the thin stock stamped-steel unit with superior durability, heat management, and lubrication efficiency—ideal for towing, heavy loads, and hard use on 6.7L Powerstroke (and compatible gas) trucks.
Key Benefits
Cast from high-grade A356-T6 heat-treated aluminum, the cover adds rigidity and impact resistance while dramatically improving heat dissipation. Deep external cooling fins increase surface area to keep gear oil cooler and maintain viscosity under stress. Internal windage scrapers/baffles control fluid flow, reduce churning, aeration, and parasitic loss, and promote consistent gear lubrication. The design also increases fluid capacity by approximately 0.5 quart for better thermal capacity. Triangulated gussets reinforce the housing, and magnetic stainless-steel fill/drain plugs capture harmful ferrous particles.
Features
- Robust A356-T6 heat-treated cast aluminum construction for superior strength and cooling vs. stock steel
- External cooling fins that maximize heat dissipation and add structural strength
- Internal fluid windage scrapers that reduce heat, aeration, and power loss while optimizing lubrication
- Triangulated gussets that add rigidity to the gear housing
- High-power neodymium magnet-equipped billet stainless steel fill and drain plugs
- Brushed aluminum finish for a clean, performance look
- Precision fit that replaces the OEM cover (reference: Ford PC3Z4033C)
- Patent pending design
Fitment
Fits 2023–2026 Ford F-250/F-350 Super Duty 4WD models equipped with the Dana M235 14-bolt front axle, including 6.7L Powerstroke diesel as well as compatible 6.8L and 7.3L gas engines. Confirm your axle is the Dana M235 before ordering.
This PPE cover delivers the cooling, capacity, and toughness needed to protect your front differential under real-world heavy-duty conditions. A smart upgrade for Super Duty owners who demand more than the factory cover can provide.