Your Cart (0)
Thumbnail Filmstrip of 7.3 Powerstroke 4-Line Feed Valley Mount Fuel Line Kit CNC Fab 422017 Images
Note:
- Fuel Manifold Color: Black
- CNC Fab recommends using the stock Super Duty Bosch pump for stock to 160/30 injectors.
- For higher horsepower setups, a 00LPH pump for trucks above 160/30 to 250/100 injectors and an adjustable pressure regulator.
- Pump, regulator, and filters will need to be purchased separately.
- CNC Fabrication recommends using Loctite 545 on the pipe threaded fittings during installation, or a gas (NG or propane) rated Teflon base paste.
- It is critical that you do not get any tape into the fuel system during installation. If you are very careful, you can use Teflon tape as long as it is also rated for gas.
Note:
- Fuel Manifold Color: Black
- CNC Fab recommends using the stock Super Duty Bosch pump for stock to 160/30 injectors.
- For higher horsepower setups, a 00LPH pump for trucks above 160/30 to 250/100 injectors and an adjustable pressure regulator.
- Pump, regulator, and filters will need to be purchased separately.
- CNC Fabrication recommends using Loctite 545 on the pipe threaded fittings during installation, or a gas (NG or propane) rated Teflon base paste.
- It is critical that you do not get any tape into the fuel system during installation. If you are very careful, you can use Teflon tape as long as it is also rated for gas.