F-250 / F-350 2020–2021 LoadLifter 5000 Ultimate Helper Spring Kit | Air Lift 88352

Get LoadLifter 5000 support plus an internal jounce bumper for a smoother loaded ride. The Air Lift 88352 LoadLifter 5000 Ultimate kit adds up to 5,000 lbs of adjustable rear load support on 2020–2022 F-250 and F-350 Super Duty 4WD single-rear-wheel trucks. It helps keep the truck level when towing or hauling and reduces squat, trailer sway, and bottoming out. The closed-cell urethane foam jounce bumper inside each air spring absorbs shock, reduces harsh jarring, and lets you safely run with zero air pressure if a bag loses air. Air pressure is fully adjustable from 5–100 PSI.

Key features

• Up to 5,000 lbs of load-leveling capacity (never exceed the truck’s GVWR)
• Exclusive internal jounce bumper for three-stage ride comfort and bottom-out protection
• Maintenance-free design that can safely run at zero PSI
• Adjustable from 5–100 PSI for empty, partial, or max-load conditions
• 2-ply fabric-reinforced rubber bellows built like a tire
• Upper and lower roll plates protect the bags and help increase capacity
• Replaces the factory jounce bumper that is often removed when adding air springs
• Under-frame, no-drill installation on most applications
• Works with most side-mount fifth-wheel and in-bed hitch systems
• Quick-connect air fittings with included air line and Schrader valve
• Limited lifetime warranty

Fitment

• 2020–2022 Ford F-250 Super Duty 4WD single rear wheel (SRW)
• 2020–2022 Ford F-350 Super Duty 4WD single rear wheel (SRW)
• Compatible with 6.7 Powerstroke diesel and gas engines
• Rear axle / factory leaf springs

Does not fit dual rear wheel (DRW / dually) trucks or commercial cab-and-chassis models.

What’s in the box

• Pair of LoadLifter 5000 Ultimate air springs with internal jounce bumpers
• Upper and lower roll plates
• Vehicle-specific mounting brackets and hardware
• Air line, fittings, and Schrader fill valve
• Illustrated installation manual

Notes & specs

• Compressor, in-cab gauges, and wireless controllers are not included
• Pair this kit with an Air Lift WirelessONE, LoadController, or similar onboard air system if you want to adjust pressure from the cab
• Brand/part number: Air Lift LoadLifter 5000 Ultimate 88352
• UPC: 729199883521
• Position: rear
• Capacity: up to 5,000 lbs
• Pressure range: 5–100 PSI
• Internal jounce bumper: yes
• Can safely run at 0 PSI
• Mount: under-frame
• Wheel setup: SRW only
• Drilling: typically none
• Install time: about 1–2 hours
• Replacement spring: Air Lift 84201
• Kit weight: about 38 lbs
• Warranty: limited lifetime

Most 88352 kits bolt on with no frame drilling and install in roughly 1–2 hours with basic hand tools. Route the included air line to a convenient fill point at the bumper, bed, or license-plate area. Always set pressure for the load you are carrying and do not exceed the vehicle manufacturer’s GVWR. If your 2020–2022 F-250 or F-350 4WD SRW squats under a trailer or bed load, the Air Lift 88352 LoadLifter 5000 Ultimate kit adds 5,000 lbs of adjustable support plus an internal jounce bumper for a safer, smoother ride.