Engineered specifically for the 2011–2016 Ford Super Duty platform equipped with the 6.7L Powerstroke V8 turbo diesel, the Banks Power Ram-Air System (42215-D) provides maximum air density gains while maintaining complete factory durability. Unlike open-element designs that inhale hot under-hood radiant air, the Ram-Air system utilizes a fully enclosed cold-air housing featuring oversized side and bottom ambient air inlets to pack cold, oxygen-dense air directly to the turbocharger compressor inlet.
The system incorporates a massive dome-shaped, multi-layer dry synthetic air filter that delivers 99% filtration efficiency without requiring filter oils or solvents. To prevent component fatigue under high torque loads, Banks incorporates a proprietary 4.5-inch flexible EPDM bellows coupler that absorbs violent engine movement without stressing the airbox mounts or turbo inlet seals.
Key Features & Benefits
- Cool, Dense Air Induction: Enclosed roto-molded housing isolates the filter from radiant under-hood heat, drawing cold ambient air through large side and forward ducts to reduce exhaust gas temperatures (EGTs).
- 26% Flow Gain Over Stock: Streamlined internal transitions eliminate turbulence, feeding greater air density to the turbo inlet for faster spool response and improved fuel efficiency.
- Oil-Free Synthetic Dry Filter: Oversized dry filter element captures sub-micron dust particles without oiling, eliminating the risk of MAF sensor contamination and simplifying routine service.
- 4.5-Inch Flexible Bellows Coupler: Absorbs engine torque flex and vibration, preventing air duct cracking, coupler blow-offs, and premature mount failures.
- Precision Sensor Calibration: Retains factory mass airflow sensor placement and mapping to guarantee error-free operation on stock ECM tunes without throwing diagnostic trouble codes.
- Direct-Fit Installation: Drops into the OEM airbox mounting footprint using basic hand tools without requiring cutting, trimming, or bracket fabrication.
Technical Specifications
- Manufacturer Part Number / SKU: 42215-D (Ram-Air Series)
- Engine Platform: 2011–2016 Ford 6.7L Powerstroke V8 Turbo Diesel
- Filter Media Type: Multi-Layer Synthetic Dry Media (Oil-Free, Washable & Reusable)
- Airflow Improvement: Up to +26% Over Factory Intake
- Housing Style: Fully Enclosed Roto-Molded High-Density Polyethylene Airbox
- Flexible Coupler Size: 4.5-Inch EPDM Bellows
- Street Legal Status: 50-State Emissions Compliant (CARB E.O. D-161-102)
- Warranty: Banks Power 5-Year Limited Warranty on Housing & Hardware / Lifetime on Filter
Vehicle Fitment & Installation Notes
- 2011–2016 Ford F-250 Super Duty Pickup – 6.7L Powerstroke V8 Turbo Diesel
- 2011–2016 Ford F-350 Super Duty Pickup – 6.7L Powerstroke V8 Turbo Diesel
- 2011–2016 Ford F-450 Super Duty Pickup & Chassis Cab – 6.7L Powerstroke V8 Turbo Diesel
- 2011–2016 Ford F-550 Super Duty Chassis Cab – 6.7L Powerstroke V8 Turbo Diesel
- Fits Model Years: 2011, 2012, 2013, 2014, 2015, 2016
- Installation Tip: Ensure the factory lower rubber mounting grommets are retained in the chassis tray before pressing the Banks airbox alignment pegs into place, and align the 4.5-inch bellows coupler in a neutral, unstressed state before tightening the T-bolt clamps.
Engineered specifically for the 2011–2016 Ford Super Duty platform equipped with the 6.7L Powerstroke V8 turbo diesel, the Banks Power Ram-Air System (42215-D) provides maximum air density gains while maintaining complete factory durability. Unlike open-element designs that inhale hot under-hood radiant air, the Ram-Air system utilizes a fully enclosed cold-air housing featuring oversized side and bottom ambient air inlets to pack cold, oxygen-dense air directly to the turbocharger compressor inlet.
The system incorporates a massive dome-shaped, multi-layer dry synthetic air filter that delivers 99% filtration efficiency without requiring filter oils or solvents. To prevent component fatigue under high torque loads, Banks incorporates a proprietary 4.5-inch flexible EPDM bellows coupler that absorbs violent engine movement without stressing the airbox mounts or turbo inlet seals.
Key Features & Benefits
Cool, Dense Air Induction: Enclosed roto-molded housing isolates the filter from radiant under-hood heat, drawing cold ambient air through large side and forward ducts to reduce exhaust gas temperatures (EGTs).
26% Flow Gain Over Stock: Str[...]
Engineered specifically for the 2011–2016 Ford Super Duty platform equipped with the 6.7L Powerstroke V8 turbo diesel, the Banks Power Ram-Air System (42215-D) provides maximum air density gains while maintaining complete factory durability. Unlike open-element designs that inhale hot under-hood radiant air, the Ram-Air system utilizes a fully enclosed cold-air housing featuring oversized side and bottom ambient air inlets to pack cold, oxygen-dense air directly to the turbocharger compressor inlet.
The system incorporates a massive dome-shaped, multi-layer dry synthetic air filter that delivers 99% filtration efficiency without requiring filter oils or solvents. To prevent component fatigue under high torque loads, Banks incorporates a proprietary 4.5-inch flexible EPDM bellows coupler that absorbs violent engine movement without stressing the airbox mounts or turbo inlet seals.
Key Features & Benefits
- Cool, Dense Air Induction: Enclosed roto-molded housing isolates the filter from radiant under-hood heat, drawing cold ambient air through large side and forward ducts to reduce exhaust gas temperatures (EGTs).
- 26% Flow Gain Over Stock: Streamlined internal transitions eliminate turbulence, feeding greater air density to the turbo inlet for faster spool response and improved fuel efficiency.
- Oil-Free Synthetic Dry Filter: Oversized dry filter element captures sub-micron dust particles without oiling, eliminating the risk of MAF sensor contamination and simplifying routine service.
- 4.5-Inch Flexible Bellows Coupler: Absorbs engine torque flex and vibration, preventing air duct cracking, coupler blow-offs, and premature mount failures.
- Precision Sensor Calibration: Retains factory mass airflow sensor placement and mapping to guarantee error-free operation on stock ECM tunes without throwing diagnostic trouble codes.
- Direct-Fit Installation: Drops into the OEM airbox mounting footprint using basic hand tools without requiring cutting, trimming, or bracket fabrication.
Technical Specifications
- Manufacturer Part Number / SKU: 42215-D (Ram-Air Series)
- Engine Platform: 2011–2016 Ford 6.7L Powerstroke V8 Turbo Diesel
- Filter Media Type: Multi-Layer Synthetic Dry Media (Oil-Free, Washable & Reusable)
- Airflow Improvement: Up to +26% Over Factory Intake
- Housing Style: Fully Enclosed Roto-Molded High-Density Polyethylene Airbox
- Flexible Coupler Size: 4.5-Inch EPDM Bellows
- Street Legal Status: 50-State Emissions Compliant (CARB E.O. D-161-102)
- Warranty: Banks Power 5-Year Limited Warranty on Housing & Hardware / Lifetime on Filter
Vehicle Fitment & Installation Notes
- 2011–2016 Ford F-250 Super Duty Pickup – 6.7L Powerstroke V8 Turbo Diesel
- 2011–2016 Ford F-350 Super Duty Pickup – 6.7L Powerstroke V8 Turbo Diesel
- 2011–2016 Ford F-450 Super Duty Pickup & Chassis Cab – 6.7L Powerstroke V8 Turbo Diesel
- 2011–2016 Ford F-550 Super Duty Chassis Cab – 6.7L Powerstroke V8 Turbo Diesel
- Fits Model Years: 2011, 2012, 2013, 2014, 2015, 2016
- Installation Tip: Ensure the factory lower rubber mounting grommets are retained in the chassis tray before pressing the Banks airbox alignment pegs into place, and align the 4.5-inch bellows coupler in a neutral, unstressed state before tightening the T-bolt clamps.