Your Cart (0)
Thumbnail Filmstrip of B6 4600 Series Shock Absorber Bilstein 24-186063 Images
Bilstein B6 4600 Series Front Shock Absorber 24-186063
Upgrade the ride and control of your stock-height Ram with a direct-fit Bilstein B6 4600 front shock. Part number 24-186063 is a 46mm monotube gas-pressure damper built as a bolt-on replacement for worn factory shocks. It keeps original ride height, uses factory mounting points, and is application-tuned for 2WD and RWD Dodge Ram and Ram 2500/3500 trucks.
The monotube body and velocity-sensitive digressive piston deliver consistent, fade-free damping. Small bumps stay comfortable. Larger hits, body roll, and heavy loads get firmer control. High-pressure nitrogen helps prevent oil foaming on long hauls, so performance holds up when towing or carrying cargo.
Sold individually. Replace both front shocks at the same time.
Key features
- Direct-fit upgrade for stock-height light trucks
- 46mm monotube design for consistent, fade-free performance
- Velocity-sensitive digressive piston that reacts to changing road conditions
- Application-specific valving for Dodge Ram and Ram 1500, 2500, and 3500
- High-pressure nitrogen charge to reduce fade under load
- Stem upper mount and bar-pin lower mount
- Yellow corrosion-resistant finish with black straight dust boot
- No reservoir and no adjustable damping
- Limited lifetime warranty
Fitment
- 2006–2008 Dodge Ram 1500 2WD front, typically Mega Cab with front coil springs
- 2003–2010 Dodge Ram 2500 2WD/RWD front, without solid front axle
- 2003–2010 Dodge Ram 3500 2WD/RWD front, without solid front axle
- 2011–2012 Ram 2500 2WD/RWD front, without solid front axle
- 2011–2012 Ram 3500 2WD/RWD front, without solid front axle
- Front position only
- Stock height only
- Two front shocks required per vehicle
- Does not fit 4WD models
- Does not fit lifted trucks
- Does not fit trucks with a solid front axle
Confirm year, drive type, and axle style before ordering.
Specifications Part number: 24-186063 Series: B6 4600 Position: Front, driver or passenger side Internal design: Monotube, gas charged Body diameter: 46 mm / 2.0 in Collapsed length: 11.25 in Extended length: 16.14 in Upper mount: Stem Lower mount: Bar pin Finish: Yellow paint Boot included: Black straight Reservoir: No Adjustable damping: No Spring seat included: No Weight: 4.41 lb UPC: 651860558974 Country of origin: Mexico Warranty: Limited lifetime
Replacement mounting kit, if needed: B4-KT1-Z223A00. Common interchange numbers include Dodge 5086561AB, 5086566AB, and Bilstein BE5-C603 / F4-BE5-C603-H0.
Bilstein B6 4600 Series Front Shock Absorber 24-186063
Upgrade the ride and control of your stock-height Ram with a direct-fit Bilstein B6 4600 front shock. Part number 24-186063 is a 46mm monotube gas-pressure damper built as a bolt-on replacement for worn factory shocks. It keeps original ride height, uses factory mounting points, and is application-tuned for 2WD and RWD Dodge Ram and Ram 2500/3500 trucks.
The monotube body and velocity-sensitive digressive piston deliver consistent, fade-free damping. Small bumps stay comfortable. Larger hits, body roll, and heavy loads get firmer control. High-pressure nitrogen helps prevent oil foaming on long hauls, so performance holds up when towing or carrying cargo.
Sold individually. Replace both front shocks at the same time.
Key features
Direct-fit upgrade for stock-height light trucks
46mm monotube design for consistent, fade-free performance
Velocity-sensitive digressive piston that reacts to changing road conditions
Application-specific valving for Dodge Ram and Ram 1500, 2500, and 3500
High-pressure nitrogen charge to reduce fade under load
Stem up[...]
Bilstein B6 4600 Series Front Shock Absorber 24-186063
Upgrade the ride and control of your stock-height Ram with a direct-fit Bilstein B6 4600 front shock. Part number 24-186063 is a 46mm monotube gas-pressure damper built as a bolt-on replacement for worn factory shocks. It keeps original ride height, uses factory mounting points, and is application-tuned for 2WD and RWD Dodge Ram and Ram 2500/3500 trucks.
The monotube body and velocity-sensitive digressive piston deliver consistent, fade-free damping. Small bumps stay comfortable. Larger hits, body roll, and heavy loads get firmer control. High-pressure nitrogen helps prevent oil foaming on long hauls, so performance holds up when towing or carrying cargo.
Sold individually. Replace both front shocks at the same time.
Key features
- Direct-fit upgrade for stock-height light trucks
- 46mm monotube design for consistent, fade-free performance
- Velocity-sensitive digressive piston that reacts to changing road conditions
- Application-specific valving for Dodge Ram and Ram 1500, 2500, and 3500
- High-pressure nitrogen charge to reduce fade under load
- Stem upper mount and bar-pin lower mount
- Yellow corrosion-resistant finish with black straight dust boot
- No reservoir and no adjustable damping
- Limited lifetime warranty
Fitment
- 2006–2008 Dodge Ram 1500 2WD front, typically Mega Cab with front coil springs
- 2003–2010 Dodge Ram 2500 2WD/RWD front, without solid front axle
- 2003–2010 Dodge Ram 3500 2WD/RWD front, without solid front axle
- 2011–2012 Ram 2500 2WD/RWD front, without solid front axle
- 2011–2012 Ram 3500 2WD/RWD front, without solid front axle
- Front position only
- Stock height only
- Two front shocks required per vehicle
- Does not fit 4WD models
- Does not fit lifted trucks
- Does not fit trucks with a solid front axle
Confirm year, drive type, and axle style before ordering.
Specifications Part number: 24-186063 Series: B6 4600 Position: Front, driver or passenger side Internal design: Monotube, gas charged Body diameter: 46 mm / 2.0 in Collapsed length: 11.25 in Extended length: 16.14 in Upper mount: Stem Lower mount: Bar pin Finish: Yellow paint Boot included: Black straight Reservoir: No Adjustable damping: No Spring seat included: No Weight: 4.41 lb UPC: 651860558974 Country of origin: Mexico Warranty: Limited lifetime
Replacement mounting kit, if needed: B4-KT1-Z223A00. Common interchange numbers include Dodge 5086561AB, 5086566AB, and Bilstein BE5-C603 / F4-BE5-C603-H0.