A slow drive-by-wire pedal makes the truck feel late when you pull into traffic. Replace that delay with the Bully Dog Thruster 49002EO, an inline module that steepens the accelerator signal without rewriting the ECU. Upgrade pedal response and leave the emissions files alone.

• Build: The control box plugs between the accelerator pedal sensor and the ECU harness and changes how fast that signal rises. The knob runs from 0 percent, which is stock pedal, to 100 percent. It does not add horsepower by retuning.
• Part number: Bully Dog 49002EO, marketed by Derive Systems and built by JMS. This is the CARB part. It is not the non-EO part 49002.
• Fits: Executive Order D-784-5 covers Dodge and Ram 2500 and 3500, 2007-2019, 6.7L, and Ram 1500, 2014-2019, 3.0L. Executive Order D-784-9 covers Jeep Wrangler and Wrangler Unlimited, 2012-2018, 3.6L, and Jeep Wrangler, 2008-2011, 3.8L.
• Does not fit: Not a 2020 or 2021 truck, not a 5.9L Cummins, and not a Ram 4500 or 5500. A Duramax Thruster is 49003EO, not this part.
• In the box: One control box, one harness, one knob, and four cable ties.
• Emissions: CARB Executive Orders D-784-5 and D-784-9, only for the vehicles listed above.

Order today to secure your Thruster. Match the truck to those two orders before you buy, because other years are not on them.