A 6.4 crank cut 0.75 mm undersize on the mains is not a standard bearing job. Clevite MS-2269P-.75MM is the P-series set for that size only.

• Series: P-series is the Clevite tri-metal bearing, steel-backed with a copper-lead overlay, and it is the replacement shell rather than the H-series piece.
• Size: 0.75 mm undersize, for a journal ground 0.75 mm under standard (about 0.030 inch). A standard journal will be too tight.
• Part number: Clevite MS-2269P-.75MM.
• Fitment: 6.4 Power Stroke, 2008-2010.
• Does not fit: A standard, 0.25 mm, or 0.50 mm crank, or a 6.0 main set.
• Not in the box: Rod bearings, pistons, and rings are not in this set. Order thrust washers separately if the engine needs them.

Order today to secure your replacement. Measure the crank journal and confirm standard versus undersize before you install it.