Your Cart (0)
Thumbnail Filmstrip of 7.3 Powerstroke High Current | Voltage IDM DTC HFHCIDM Images
In addition to our normal rebuild process, the DTC High-Voltage High-Current units get two additional tweaks. The first step increases the output voltage to the injectors from 110 volts to 140 volts. The second step increases the current output by about 20%. This activates the injector quicker, holds it on (poppet valve open) more firmly, and keeps it on just a bit longer. The result is snappier acceleration and a more responsive truck.
After the rebuilding and modifying is done, we run each IDM through a 20 point test on the test bench, and then we run it continuously for 30 minutes at 3000 RPM and 3.0 milliseconds of injector pulse width which is longer and harder than you could ever run a truck in real life. When it passes this test, then it is ready to sell.
DTC been doing the high-voltage mod since 2004, and invented the high-current mod in 2008, and haven't seen any negative side effects to either the injectors or the IDM in this time.
Note: If you are seeing a P1298 soft trouble code after installing IDM, this is completely normal for an upgraded IDM and will not cause any issues.
Note: We do not test your core upon receiving.
*No returns on this product. Electronics can no be returned for a refund.
In addition to our normal rebuild process, the DTC High-Voltage High-Current units get two additional tweaks. The first step increases the output voltage to the injectors from 110 volts to 140 volts. The second step increases the current output by about 20%. This activates the injector quicker, holds it on (poppet valve open) more firmly, and keeps it on just a bit longer. The result is snappier acceleration and a more responsive truck.
After the rebuilding and modifying is done, we run each IDM through a 20 point test on the test bench, and then we run it continuously for 30 minutes at 3000 RPM and 3.0 milliseconds of injector pulse width which is longer and harder than you could ever run a truck in real life. When it passes this test, then it is ready to sell.
DTC been doing the high-voltage mod since 2004, and invented the high-current mod in 2008, and haven't seen any negative side effects to either the injectors or the IDM in this time.
Note: If you are seeing a P1298 soft trouble code after installing IDM, this is completely normal for an upgraded IDM and will not cause any issues.
Note: We do not test your core upon receiving.
<[...]
In addition to our normal rebuild process, the DTC High-Voltage High-Current units get two additional tweaks. The first step increases the output voltage to the injectors from 110 volts to 140 volts. The second step increases the current output by about 20%. This activates the injector quicker, holds it on (poppet valve open) more firmly, and keeps it on just a bit longer. The result is snappier acceleration and a more responsive truck.
After the rebuilding and modifying is done, we run each IDM through a 20 point test on the test bench, and then we run it continuously for 30 minutes at 3000 RPM and 3.0 milliseconds of injector pulse width which is longer and harder than you could ever run a truck in real life. When it passes this test, then it is ready to sell.
DTC been doing the high-voltage mod since 2004, and invented the high-current mod in 2008, and haven't seen any negative side effects to either the injectors or the IDM in this time.
Note: If you are seeing a P1298 soft trouble code after installing IDM, this is completely normal for an upgraded IDM and will not cause any issues.
Note: We do not test your core upon receiving.
*No returns on this product. Electronics can no be returned for a refund.
Q
Mike Parker • 02/05/2025, 3:51:39 AM
I read you didn’t need high voltage if you run a chip in Powerstroke forum? I have a TS chip . I want to do full force 180/30 injectors with new solenoids and the full force chip reburn. Is high voltage ok with future upgrades
A
02/10/2025, 8:13:56 PM
High Voltage IDM's are a good upgrade for all injectors.
Q
chris • 02/25/2025, 2:44:47 PM
do i need a high voltage?current if i have a prograrmmer?
A
02/25/2025, 3:43:31 PM
It's not required or needed. Will help throttle response slightly however.
Q
Kyle Hall • 03/07/2025, 1:40:01 PM
Will and automatic pcm work in a Zf6 swap?
A
03/11/2025, 2:46:26 PM
We offer this service. Please search dtcPCMAutoManual part number on our website.
Q
Nathan hale • 03/15/2025, 1:32:42 PM
Does the sinister diesel high output alternator improve or help out the high voltage idm
A
03/17/2025, 8:43:45 PM
No.
Q
Ryan O • 03/22/2025, 1:09:39 AM
What is a soft trouble code? Will it make the check engine light come on?
A
03/24/2025, 6:30:34 PM
No check engine light
5/5 Stars out of 18 Reviews
0
0
0
0
18
Blake Tyner (Yucca valley CA) | March 11th, 2025
This idm is amazing, I notice a difference with acceleration and overall fuel economy, and the best part is this is a bit cheaper than an OEM replacement from O’ Reilly’s. I will always stick with full force when I can for parts, they never let me down and have some of the best customer service out there!
Ronnie Brand (Deland) | November 11th, 2024
i purchased this for my 2001 7.3 power stroke, along with the Atlas electronic boost fooler. the turn around was very quick. i sent my core in first and had my new IDM in less than a week. the boost fooler was so simple to install. literally maybe 30 second. between the 2 parts my truck has woke up. no more check engine light when passing while haling my 18' enclosed trailer.
Paul Duke (iowa) | September 6th, 2024
I really got some performance increase with this IDM. I bought my OBS truck new and that's a long time to remember but I really think it runs a better now than when it was new.Very happy with the product and will buy another for my F250 when needed.
Norm (montana) | March 24th, 2024
repaired hard starting and low power, shipping and core return quick.
B. Meador (New Mexico) | November 16th, 2023
My 7.3L has over 500k miles, had been idling really rough but pulled fine. My mileage was slowly decreasing over time. My cruise control would drop out while I was in a headwind or pulling a load up an incline. Finally, it was this last symptom that led me to the FICM. This new module brought everything back in line. Idles smooth, accelerates with a load like a bat outta hell. I'm back to the old days when I had to remember to keep my foot light on the throttle.
Proposition 65 Warning Information -
P65Warnings.ca.gov
Fits: 7.3 Powerstroke 1999-2003
Fits: 7.3 Powerstroke 1994-2003
Fits: 7.3 Powerstroke 1994-2003
Fits: Universal
Fits: 7.3 Powerstroke 1994-2003
Fits: 7.3 Powerstroke 1994-2003