Your Cart (0)
Thumbnail Filmstrip of FASS HS1002K 4 Inch Heat Sink for FASS System Motor Images
Videos (1)
The FASS HS1002K is a 4 inch heat sink that fits over the motor on FASS fuel systems. FASS says it can lower internal motor temperature by up to 20 degrees.
It fits motors with an approximately 4.375 inch motor housing, used on FASS systems rated at 140, 220, 240, 250, 260, 290, 360 and 540 GPH.
- Cooler Motor: Lowers internal motor temperature by up to 20 degrees.
- Hardcoat Anodized: Black finish resists corrosion.
- Quick Retrofit: Installs in just a few minutes.
- Wide Compatibility: Signature, Signature Plus, Titanium, Industrial and Competition Series.
Technical Specifications
- Part Number: HS1002K
- Fits Motor Housing: Approximately 4.375 inch
- FASS GPH Ratings: 140G, 220G, 240G, 250G, 260G, 290G, 360G, 540G
- Core Requirement: No core required
Vehicle Fitment & Technical Installation Notes
- Fitment: FASS systems rated 140G, 220G, 240G, 250G, 260G, 290G, 360G and 540G
- Installation Tip: Measure your FASS motor housing before ordering. Competition Series systems need two heat sinks.
The FASS HS1002K is a 4 inch heat sink that fits over the motor on FASS fuel systems. FASS says it can lower internal motor temperature by up to 20 degrees.
It fits motors with an approximately 4.375 inch motor housing, used on FASS systems rated at 140, 220, 240, 250, 260, 290, 360 and 540 GPH.
Cooler Motor: Lowers internal motor temperature by up to 20 degrees.
Hardcoat Anodized: Black finish resists corrosion.
Quick Retrofit: Installs in just a few minutes.
Wide Compatibility: Signature, Signature Plus, Titanium, Industrial and Competition Series.
Technical Specifications
Part Number: HS1002K
Fits Motor Housing: Approximately 4.375 inch
FASS GPH Ratings: 140G, 220G, 240G, 250G, 260G, 290G, 360G, 540G
Core Requirement: No core required
Vehicle Fitment & Technical Installation Notes
Fitment: FASS systems rated 140G, 220G, 240G, 250G, 260G, 290G, 360G and 540G
Installation Tip: Measure your FASS motor housing before ordering. Competition Series systems need two heat sinks.[...]
The FASS HS1002K is a 4 inch heat sink that fits over the motor on FASS fuel systems. FASS says it can lower internal motor temperature by up to 20 degrees.
It fits motors with an approximately 4.375 inch motor housing, used on FASS systems rated at 140, 220, 240, 250, 260, 290, 360 and 540 GPH.
- Cooler Motor: Lowers internal motor temperature by up to 20 degrees.
- Hardcoat Anodized: Black finish resists corrosion.
- Quick Retrofit: Installs in just a few minutes.
- Wide Compatibility: Signature, Signature Plus, Titanium, Industrial and Competition Series.
Technical Specifications
- Part Number: HS1002K
- Fits Motor Housing: Approximately 4.375 inch
- FASS GPH Ratings: 140G, 220G, 240G, 250G, 260G, 290G, 360G, 540G
- Core Requirement: No core required
Vehicle Fitment & Technical Installation Notes
- Fitment: FASS systems rated 140G, 220G, 240G, 250G, 260G, 290G, 360G and 540G
- Installation Tip: Measure your FASS motor housing before ordering. Competition Series systems need two heat sinks.