Your Cart (0)
Thumbnail Filmstrip of 6.7 Powerstroke PowerFlo Lift Pump with Under Bed Filter (Short Bed) - Fleece FPE-PF-FMC-1724-SB-KIT Images
The factory lift pump and plastic "furnace" style filter on a 2017-2024 6.7L Powerstroke are two of the first things owners want to fix once they start adding power. The Fleece PowerFlo Lift Pump with Under Bed Filter kit for short bed trucks handles both: a high-flow pump drops into the tank in place of the stock unit, and a billet filter base bolts up where the factory housing sits.
Your factory fuel lines, harness, and fuel tank stay as they are, with no cutting or splicing, and the stock fuel control module still manages fuel pressure based on engine load. The pump's active fill bucket keeps it fed, so you don't need a sump or draw straw and you avoid the quarter-tank starvation that some high-flow setups run into.
What you get:
- PowerFlo in-tank lift pump with integral fuel level sender
- Chassis wiring adapter harness and fuel sending unit tank O-ring
- Assembled billet aluminum under-bed filter base with a Donaldson spin-on filter
- Water-in-fuel sensor, extension harness, and mounting bolt
- Replacement fuel line retaining clips for the 1/2" and 12mm connections
- Fits 2017-2024 Ford F-250, F-350, and F-450 Super Duty 6.7L Powerstroke short bed pickups
- Fleece lifetime limited parts warranty
Specs:
- Kit part number: FPE-PF-FMC-1724-SB-KIT (lift pump FPE-PF-FMC-1724-SB)
- Pump design: dual gerotor, supports up to 800 HP
- Replaces Ford pump assembly HC3Z-9H307AQ
- Replaces factory filter housings FD-4625, FD4625AA, HC3Z-9N184-C, and HC3Z-9N184-J
- Filter: Donaldson P553203, 99% efficiency at 4 microns
- Pump outlet and return threaded for -8 O-ring fittings (3/4"-16)
- Biodiesel: validated up to B20
- Fuel heater provision: optional heater FPE-FH-FMC-1724 sold separately
This kit is for short bed pickups only and does not fit cab and chassis trucks. It works with Titan and short bed S&B aftermarket tanks, and Fleece has validated it on trucks running the S&S Diesel Motorsport DCR conversion and CP4 Disaster Prevention Kit. Pair it with the Fleece under hood filter base for a full fuel system refresh. Verify fitment for your truck before ordering.
The factory lift pump and plastic "furnace" style filter on a 2017-2024 6.7L Powerstroke are two of the first things owners want to fix once they start adding power. The Fleece PowerFlo Lift Pump with Under Bed Filter kit for short bed trucks handles both: a high-flow pump drops into the tank in place of the stock unit, and a billet filter base bolts up where the factory housing sits.
Your factory fuel lines, harness, and fuel tank stay as they are, with no cutting or splicing, and the stock fuel control module still manages fuel pressure based on engine load. The pump's active fill bucket keeps it fed, so you don't need a sump or draw straw and you avoid the quarter-tank starvation that some high-flow setups run into.
What you get:
PowerFlo in-tank lift pump with integral fuel level sender
Chassis wiring adapter harness and fuel sending unit tank O-ring
Assembled billet aluminum under-bed filter base with a Donaldson spin-on filter
Water-in-fuel sensor, extension harness, and mounting bolt
Replacement fuel line retaining clips for the 1/2" and 12mm connections
Fits 2017-2024 Ford F-250, F-350, and F-450 Super Dut[...]
The factory lift pump and plastic "furnace" style filter on a 2017-2024 6.7L Powerstroke are two of the first things owners want to fix once they start adding power. The Fleece PowerFlo Lift Pump with Under Bed Filter kit for short bed trucks handles both: a high-flow pump drops into the tank in place of the stock unit, and a billet filter base bolts up where the factory housing sits.
Your factory fuel lines, harness, and fuel tank stay as they are, with no cutting or splicing, and the stock fuel control module still manages fuel pressure based on engine load. The pump's active fill bucket keeps it fed, so you don't need a sump or draw straw and you avoid the quarter-tank starvation that some high-flow setups run into.
What you get:
- PowerFlo in-tank lift pump with integral fuel level sender
- Chassis wiring adapter harness and fuel sending unit tank O-ring
- Assembled billet aluminum under-bed filter base with a Donaldson spin-on filter
- Water-in-fuel sensor, extension harness, and mounting bolt
- Replacement fuel line retaining clips for the 1/2" and 12mm connections
- Fits 2017-2024 Ford F-250, F-350, and F-450 Super Duty 6.7L Powerstroke short bed pickups
- Fleece lifetime limited parts warranty
Specs:
- Kit part number: FPE-PF-FMC-1724-SB-KIT (lift pump FPE-PF-FMC-1724-SB)
- Pump design: dual gerotor, supports up to 800 HP
- Replaces Ford pump assembly HC3Z-9H307AQ
- Replaces factory filter housings FD-4625, FD4625AA, HC3Z-9N184-C, and HC3Z-9N184-J
- Filter: Donaldson P553203, 99% efficiency at 4 microns
- Pump outlet and return threaded for -8 O-ring fittings (3/4"-16)
- Biodiesel: validated up to B20
- Fuel heater provision: optional heater FPE-FH-FMC-1724 sold separately
This kit is for short bed pickups only and does not fit cab and chassis trucks. It works with Titan and short bed S&B aftermarket tanks, and Fleece has validated it on trucks running the S&S Diesel Motorsport DCR conversion and CP4 Disaster Prevention Kit. Pair it with the Fleece under hood filter base for a full fuel system refresh. Verify fitment for your truck before ordering.