Your Cart (0)
Thumbnail Filmstrip of 1994-2002 5.9L 12V / 24V Cummins Max Flow Elbow Pacbrake C44083 Images
The factory turbo outlet elbow on the 2nd Gen Cummins chokes exhaust flow right at the turbine, which raises EGT and slows spool. Replace it with the Pacbrake C44083 Max Flow elbow. It fits 1994-2002 Dodge Ram 2500 and 3500, 2WD and 4WD, with the 5.9L Cummins.
In the box: Elbow and exhaust adapter. No core charge applies to this part.
Key Features & Benefits
- 4 inch cast iron: Opens the exhaust path out of the turbo to lower EGT, cut turbo lag and help power and mileage.
- Pyrometer port: Pre-tapped 1/8 inch NPT port for a pyrometer probe or a backpressure gauge.
- Exhaust brake ready: Works where an InLine exhaust brake installation is required.
Technical Specifications
- Manufacturer/Brand: Pacbrake
- Part Number/SKU: C44083 (pacC44083)
- Product Type: Max Flow Elbow
- Truck Compatibility: 1994-2002 Dodge Ram 2500 and 3500, 2WD and 4WD, with the 5.9L Cummins
- Engine Platform: 5.9L 12V / 24V Cummins
- Core Requirement: No core required
Vehicle Fitment & Technical Installation Notes
Fits 1994-2002 Dodge Ram 2500 and 3500, 2WD and 4WD, with the 5.9L Cummins.
Installation Tip: Plan on a new turbo outlet clamp if the old one is rusted.
The factory turbo outlet elbow on the 2nd Gen Cummins chokes exhaust flow right at the turbine, which raises EGT and slows spool. Replace it with the Pacbrake C44083 Max Flow elbow. It fits 1994-2002 Dodge Ram 2500 and 3500, 2WD and 4WD, with the 5.9L Cummins.
In the box: Elbow and exhaust adapter. No core charge applies to this part.
Key Features & Benefits
4 inch cast iron: Opens the exhaust path out of the turbo to lower EGT, cut turbo lag and help power and mileage.
Pyrometer port: Pre-tapped 1/8 inch NPT port for a pyrometer probe or a backpressure gauge.
Exhaust brake ready: Works where an InLine exhaust brake installation is required.
Technical Specifications
Manufacturer/Brand: Pacbrake
Part Number/SKU: C44083 (pacC44083)
Product Type: Max Flow Elbow
Truck Compatibility: 1994-2002 Dodge Ram 2500 and 3500, 2WD and 4WD, with the 5.9L Cummins
Engine Platform: 5.9L 12V / 24V Cummins
Core Requirement: No core required
Vehicle Fitment & Technical Installation Notes
Fits 1994-2002 Dodge Ram 2500 and 3500, 2WD and 4WD, with the 5.9L Cummins.
The factory turbo outlet elbow on the 2nd Gen Cummins chokes exhaust flow right at the turbine, which raises EGT and slows spool. Replace it with the Pacbrake C44083 Max Flow elbow. It fits 1994-2002 Dodge Ram 2500 and 3500, 2WD and 4WD, with the 5.9L Cummins.
In the box: Elbow and exhaust adapter. No core charge applies to this part.
Key Features & Benefits
- 4 inch cast iron: Opens the exhaust path out of the turbo to lower EGT, cut turbo lag and help power and mileage.
- Pyrometer port: Pre-tapped 1/8 inch NPT port for a pyrometer probe or a backpressure gauge.
- Exhaust brake ready: Works where an InLine exhaust brake installation is required.
Technical Specifications
- Manufacturer/Brand: Pacbrake
- Part Number/SKU: C44083 (pacC44083)
- Product Type: Max Flow Elbow
- Truck Compatibility: 1994-2002 Dodge Ram 2500 and 3500, 2WD and 4WD, with the 5.9L Cummins
- Engine Platform: 5.9L 12V / 24V Cummins
- Core Requirement: No core required
Vehicle Fitment & Technical Installation Notes
Fits 1994-2002 Dodge Ram 2500 and 3500, 2WD and 4WD, with the 5.9L Cummins.
Installation Tip: Plan on a new turbo outlet clamp if the old one is rusted.
Currently Viewing Reviews with a rating of 3. Click here to reset.
3/5 Stars out of 1 Reviews
0
0
1
0
0
Mike Harding (Hickory NC) | May 17th, 2022
The PAC brake elbow came with everything listed . Easy to install . I�ve cut, & rewelded the ball type flange 3 times making sure it�s centered on the elbow. Leaving it loosely for until centered, & clamped before tracking it in place . It seems to work fine until I turn on my exhaust brake . Then it starts leaking . I was able to get it somewhat better by tapping the clamp while wrenching it down as tight as I could , but it still leaks �the 3�-4� down pipe turbo v-band I replace this one with I had No problems with the straight heavy flanges leaking . I�m a certified pipe welder off over 30 yrs . The flange on the short flared piece of pipe they sent is so thin it leaks at each space between the v clamp s jaws .
Proposition 65 Warning Information -
P65Warnings.ca.gov
Fits: 5.9 Cummins 1998.5-2002
Fits: 5.9 Cummins 1989-2002
Fits: 5.9 Cummins 1998.5-2002