The PPE 238041010 heavy-duty cast aluminum front differential cover in the Brushed finish fits 2003-2013 Dodge Ram 2500/3500 (Ram for 2010-2013) trucks with the 5.9L or 6.7L Cummins and the AAM 9.25-inch 14-bolt front axle. A stamped-steel factory cover leaves gear oil with little volume or surface area to shed heat, which shortens the life of gears, bearings, and limited-slip clutches under towing and heavy load.
This cover is precision-cast from heat-treated A356.0-T6 aluminum in a permanent steel mold. It adds 0.9 quart of oil capacity, uses half-inch external fins and internal windage scrapers that also form a cross-bracing structure, and includes 304 stainless service plugs with high-temperature neodymium magnets and Viton O-rings. The fill plug is positioned at the factory fill level. Cast-in gussets add support at the housing flange.
Key Features & Benefits
- A356.0-T6 Cast Aluminum: Heat-treated alloy improves strength, impact resistance, and thermal conductivity over a stock steel cover.
- 0.9-Quart Extra Capacity and Half-Inch Fins: More oil and added surface area help keep differential temperatures in check.
- Internal Windage Scrapers: Reduce churning, aeration, and parasitic loss while bracing the cover with the external fins.
- Magnetic Stainless Service Plugs: 304 stainless fill and drain plugs with neodymium magnets capture ferrous particles. Viton O-rings seal the plugs.
- Brushed Finish Kit: This is the brushed 238041010 cover. The kit includes a 1-inch magnetic fill plug, a 9/16-18 #6 ORB drain plug, and (14) M8-1.25 x 30 mm socket-head cap screws. Installation uses RTV on the flange; no gasket is included.
Technical Specifications
- Manufacturer: PPE (Pacific Performance Engineering)
- Part Number: 238041010
- Product Type: Front Differential Cover
- Material / Finish: A356.0-T6 cast aluminum, Brushed
- Axle: AAM 9.25-inch 14-bolt front
- Added Oil Capacity: 0.9 quart
- Hardware: (14) M8-1.25 x 30 mm socket-head cap screws; 1-inch magnetic fill plug; 9/16-18 #6 ORB drain plug
- Truck Compatibility: 2003-2013 Ram 2500/3500 with the AAM 9.25-inch 14-bolt front axle
- Engine Platform: 5.9L and 6.7L Cummins (2003-2013)
- OEM Reference: Mopar 5086680AC, 68065443AC, 5086680AB
- Warranty: Limited Lifetime (PPE cast aluminum pans and covers)
Vehicle Fitment & Technical Installation Notes
Fits 2003-2013 Dodge Ram 2500/3500 (Ram for 2010-2013) 5.9L and 6.7L Cummins trucks with the AAM 9.25-inch 14-bolt front axle. Official coverage is that axle, including gasoline HD trucks that use it. This is not the later 12-bolt 9.25-inch front cover; PPE lists 238042000 for 2013-2026 12-bolt applications, so confirm the bolt count on a 2013 truck before ordering.
Installation Tip: With the truck off, cool, and secure, place a drain pan under the axle, remove the stock screws starting at the bottom, and pry off the factory cover. Let the oil drain, then scrape the housing flange clean of old sealant. Apply a continuous bead of RTV into the PPE cover flange around the bolt holes with no gaps. Hang the cover with two M8 screws, install the rest finger-tight, then torque in a crossing pattern to 12-15 ft-lbs. Snug the drain plug, fill to the manufacturer-recommended level, torque the fill plug to 18-22 ft-lbs, and check for leaks.
The PPE 238041010 heavy-duty cast aluminum front differential cover in the Brushed finish fits 2003-2013 Dodge Ram 2500/3500 (Ram for 2010-2013) trucks with the 5.9L or 6.7L Cummins and the AAM 9.25-inch 14-bolt front axle. A stamped-steel factory cover leaves gear oil with little volume or surface area to shed heat, which shortens the life of gears, bearings, and limited-slip clutches under towing and heavy load.
This cover is precision-cast from heat-treated A356.0-T6 aluminum in a permanent steel mold. It adds 0.9 quart of oil capacity, uses half-inch external fins and internal windage scrapers that also form a cross-bracing structure, and includes 304 stainless service plugs with high-temperature neodymium magnets and Viton O-rings. The fill plug is positioned at the factory fill level. Cast-in gussets add support at the housing flange.
Key Features & Benefits
A356.0-T6 Cast Aluminum: Heat-treated alloy improves strength, impact resistance, and thermal conductivity over a stock steel cover.
0.9-Quart Extra Capacity and Half-Inch Fins: More oil and added surface area help keep differential temperatures in check.
Internal Windage S[...]
The PPE 238041010 heavy-duty cast aluminum front differential cover in the Brushed finish fits 2003-2013 Dodge Ram 2500/3500 (Ram for 2010-2013) trucks with the 5.9L or 6.7L Cummins and the AAM 9.25-inch 14-bolt front axle. A stamped-steel factory cover leaves gear oil with little volume or surface area to shed heat, which shortens the life of gears, bearings, and limited-slip clutches under towing and heavy load.
This cover is precision-cast from heat-treated A356.0-T6 aluminum in a permanent steel mold. It adds 0.9 quart of oil capacity, uses half-inch external fins and internal windage scrapers that also form a cross-bracing structure, and includes 304 stainless service plugs with high-temperature neodymium magnets and Viton O-rings. The fill plug is positioned at the factory fill level. Cast-in gussets add support at the housing flange.
Key Features & Benefits
- A356.0-T6 Cast Aluminum: Heat-treated alloy improves strength, impact resistance, and thermal conductivity over a stock steel cover.
- 0.9-Quart Extra Capacity and Half-Inch Fins: More oil and added surface area help keep differential temperatures in check.
- Internal Windage Scrapers: Reduce churning, aeration, and parasitic loss while bracing the cover with the external fins.
- Magnetic Stainless Service Plugs: 304 stainless fill and drain plugs with neodymium magnets capture ferrous particles. Viton O-rings seal the plugs.
- Brushed Finish Kit: This is the brushed 238041010 cover. The kit includes a 1-inch magnetic fill plug, a 9/16-18 #6 ORB drain plug, and (14) M8-1.25 x 30 mm socket-head cap screws. Installation uses RTV on the flange; no gasket is included.
Technical Specifications
- Manufacturer: PPE (Pacific Performance Engineering)
- Part Number: 238041010
- Product Type: Front Differential Cover
- Material / Finish: A356.0-T6 cast aluminum, Brushed
- Axle: AAM 9.25-inch 14-bolt front
- Added Oil Capacity: 0.9 quart
- Hardware: (14) M8-1.25 x 30 mm socket-head cap screws; 1-inch magnetic fill plug; 9/16-18 #6 ORB drain plug
- Truck Compatibility: 2003-2013 Ram 2500/3500 with the AAM 9.25-inch 14-bolt front axle
- Engine Platform: 5.9L and 6.7L Cummins (2003-2013)
- OEM Reference: Mopar 5086680AC, 68065443AC, 5086680AB
- Warranty: Limited Lifetime (PPE cast aluminum pans and covers)
Vehicle Fitment & Technical Installation Notes
Fits 2003-2013 Dodge Ram 2500/3500 (Ram for 2010-2013) 5.9L and 6.7L Cummins trucks with the AAM 9.25-inch 14-bolt front axle. Official coverage is that axle, including gasoline HD trucks that use it. This is not the later 12-bolt 9.25-inch front cover; PPE lists 238042000 for 2013-2026 12-bolt applications, so confirm the bolt count on a 2013 truck before ordering.
Installation Tip: With the truck off, cool, and secure, place a drain pan under the axle, remove the stock screws starting at the bottom, and pry off the factory cover. Let the oil drain, then scrape the housing flange clean of old sealant. Apply a continuous bead of RTV into the PPE cover flange around the bolt holes with no gaps. Hang the cover with two M8 screws, install the rest finger-tight, then torque in a crossing pattern to 12-15 ft-lbs. Snug the drain plug, fill to the manufacturer-recommended level, torque the fill plug to 18-22 ft-lbs, and check for leaks.