The BD Diesel 1064422SM TowMaster package pairs a rebuilt E4OD transmission with a matched BD ProForce torque converter for 1995-1997 Ford F-250 and F-350 Super Duty 2WD trucks with the 7.3L Powerstroke. The factory E4OD was built for stock power, so added fuel and heavy trailers lead to soft shifts, slipping, heat and burned clutches. This package is built to carry that load.
BD replaces aluminum planetaries with steel, fully rollerizes the geartrain and installs a full shift kit with a line mod valve and recalibrated accumulator body for quicker, firmer shifts. The ProForce converter uses cast aluminum stators and a stamp-forged steel cover, and the pair is dyno tested before it ships with BD's deep aluminum pan and a frame-mounted full flow filter kit. Core required, refundable deposit at checkout.
Key Features & Benefits
- Increased Clutch Count: Forward 5, direct 5, low reverse 7, intermediate 4, overdrive 4 and coast 2.
- Full Shift Kit: Line mod valve, recalibrated accumulator body and increased converter pressure for firm, consistent shifts.
- Durability Upgrades: Fully rollerized geartrain, machined center support, upgraded OD snap ring, reworked front pump and added lube to the OD planet and shafts.
- ProForce Converter: Torque multiplying cast aluminum stators and furnace-brazed fins for lower rpm response and less heat.
- Deep Pan and Filter: BD HD pan adds 6 quarts of fluid capacity, plus an auxiliary frame-mounted full flow filter kit.
Technical Specifications
- Manufacturer: BD Diesel Performance
- Part Number / SKU: 1064422SM
- Product Type: Transmission and torque converter package
- Transmission: Ford E4OD 4-speed, 2WD
- Torque Converter: BD ProForce, street and towing
- Truck Compatibility: 1995-1997 Ford F-250 and F-350 Super Duty
- Engine Platform: 7.3L Powerstroke
- Install Time: About 7 hours
- Core Requirement: Core required, refundable deposit at checkout
- Warranty: 36 months or 150,000 miles on parts, 12 months or 24,000 miles on labor; race use not covered; remote filter required for warranty inspection
Vehicle Fitment & Technical Installation Notes
Fits 1995-1997 Ford F-250 and F-350 Super Duty 2WD trucks with the 7.3L Powerstroke and E4OD automatic.
Installation Tip: Flush the transmission cooler and lines with a back-flow machine and oil-based cleaner before installing so debris from the old unit cannot reach the new one.
The BD Diesel 1064422SM TowMaster package pairs a rebuilt E4OD transmission with a matched BD ProForce torque converter for 1995-1997 Ford F-250 and F-350 Super Duty 2WD trucks with the 7.3L Powerstroke. The factory E4OD was built for stock power, so added fuel and heavy trailers lead to soft shifts, slipping, heat and burned clutches. This package is built to carry that load.
BD replaces aluminum planetaries with steel, fully rollerizes the geartrain and installs a full shift kit with a line mod valve and recalibrated accumulator body for quicker, firmer shifts. The ProForce converter uses cast aluminum stators and a stamp-forged steel cover, and the pair is dyno tested before it ships with BD's deep aluminum pan and a frame-mounted full flow filter kit. Core required, refundable deposit at checkout.
Key Features & Benefits
Increased Clutch Count: Forward 5, direct 5, low reverse 7, intermediate 4, overdrive 4 and coast 2.
Full Shift Kit: Line mod valve, recalibrated accumulator body and increased converter pressure for firm, consistent shifts.
Durability Upgrades: Fully rollerized geartrain, machined center support, upgraded OD sna[...]
The BD Diesel 1064422SM TowMaster package pairs a rebuilt E4OD transmission with a matched BD ProForce torque converter for 1995-1997 Ford F-250 and F-350 Super Duty 2WD trucks with the 7.3L Powerstroke. The factory E4OD was built for stock power, so added fuel and heavy trailers lead to soft shifts, slipping, heat and burned clutches. This package is built to carry that load.
BD replaces aluminum planetaries with steel, fully rollerizes the geartrain and installs a full shift kit with a line mod valve and recalibrated accumulator body for quicker, firmer shifts. The ProForce converter uses cast aluminum stators and a stamp-forged steel cover, and the pair is dyno tested before it ships with BD's deep aluminum pan and a frame-mounted full flow filter kit. Core required, refundable deposit at checkout.
Key Features & Benefits
- Increased Clutch Count: Forward 5, direct 5, low reverse 7, intermediate 4, overdrive 4 and coast 2.
- Full Shift Kit: Line mod valve, recalibrated accumulator body and increased converter pressure for firm, consistent shifts.
- Durability Upgrades: Fully rollerized geartrain, machined center support, upgraded OD snap ring, reworked front pump and added lube to the OD planet and shafts.
- ProForce Converter: Torque multiplying cast aluminum stators and furnace-brazed fins for lower rpm response and less heat.
- Deep Pan and Filter: BD HD pan adds 6 quarts of fluid capacity, plus an auxiliary frame-mounted full flow filter kit.
Technical Specifications
- Manufacturer: BD Diesel Performance
- Part Number / SKU: 1064422SM
- Product Type: Transmission and torque converter package
- Transmission: Ford E4OD 4-speed, 2WD
- Torque Converter: BD ProForce, street and towing
- Truck Compatibility: 1995-1997 Ford F-250 and F-350 Super Duty
- Engine Platform: 7.3L Powerstroke
- Install Time: About 7 hours
- Core Requirement: Core required, refundable deposit at checkout
- Warranty: 36 months or 150,000 miles on parts, 12 months or 24,000 miles on labor; race use not covered; remote filter required for warranty inspection
Vehicle Fitment & Technical Installation Notes
Fits 1995-1997 Ford F-250 and F-350 Super Duty 2WD trucks with the 7.3L Powerstroke and E4OD automatic.
Installation Tip: Flush the transmission cooler and lines with a back-flow machine and oil-based cleaner before installing so debris from the old unit cannot reach the new one.