The Beans Diesel 280002 is a multi-function fuel tank sump. One 3-inch hole and one bolt. The tank does not have to come down. A 3-inch hole saw for a plastic tank is in the kit. A metal tank needs a metal saw.

Two -8 O-ring-boss to 1/2-inch push-lock fittings, a -8 plug, a 1/4-inch NPT drain, a stainless bolt, and the O-rings are included. Plug one port for a single outlet. Use both for a supply and a return, or for a double feed. A sediment bowl is machined in the sump. It needs about 4 inches of flat tank. It picks up below an eighth of a tank. The pump is not in this box.

It fits a diesel fuel tank with a 4-inch flat spot.

Fitment

• Universal diesel tanks
• One 3-inch hole
• Single bolt
• Two 1/2-inch push-lock fittings
• Plug for single-outlet use
• 1/4-inch NPT drain
• Plastic-tank hole saw included
• Pump not included

Drain the tank before you drill. Seal the O-ring. A metal tank needs its own hole saw.