Free Shipping Qualifying Orders Over $199
Secure Checkout
Ram 2500 19-23 B8 5160 Series Shock Absorber | Bilstein 25-268645

Thumbnail Filmstrip of Ram 2500 19-23 B8 5160 Series Shock Absorber | Bilstein 25-268645 Images

    Switch out the worn shocks on your Ram 2500/3500 with the Bilstein 25-268645 5160 Series Shock Absorber. Designed as a direct fit solution for lifted trucks and SUVs, Bilstein B8 5160 remote reservoir shock absorbers provide increased cooling capacity and wheel travel compared to traditional shock absorbers, optimizing overall performance. Featuring a monotube design, these shocks ensure consistent, fade-free performance and utilize velocity-sensitive digressive valve settings tuned for each specific application. Each shock is fitted with a unique 360-degree swivel banjo hose fitting for a clean, low-profile installation, enhancing the durability of your vehicle to conquer the harshest off-road environments.


    Features:


    • Direct fit solution for lifted trucks and SUVs
    • Remote reservoir for increased cooling capacity and wheel travel
    • Monotube design for consistent, fade-free performance
    • Velocity-sensitive digressive valve settings
    • Unique 360-degree swivel banjo hose fitting for clean installation
    • Increased overall durability for off-road environments

    Specifications:


    • Part Number: 25-268645
    • Series: 5160 Series
    • Position: Rear
    • Quantity Per Vehicle: 2 (Sold Individually)
    • Finish: Zinc Plated
    • Reservoir: Yes
    • Billet Reservoir Clamp Included: Yes
    • Body Design: Smooth Body (Non-Coilover)
    • Body Diameter: 46mm
    • Spring Seat Included: No
    • Adjustable Damping: Non-Adjustable

    Measurements:


    • Collapsed Length (IN): 16.75
    • Extended Length (IN): 24.96
    • Collapsed Length (MM): 425.5
    • Extended Length (MM): 634.0

    Note:


    • 4WD Only; For Rear Lifted Height: 0-1"; Without Air Leveling Suspension
    • Lift height is suggested by manufacturer. Due to various aftermarket suspension systems, it is recommended to take measurements for proper application. A pin-to-eye shock is measured from the base of the stem where the mounting hardware rests to the center of the eyelet. Shock absorbers are sold individually.

    Upgrade your Ram 2500/3500's suspension with the Bilstein 25-268645 5160 Series Shock Absorber for enhanced performance, durability, and handling in any terrain.


    Purchase Ram 2500 19-23 B8 5160 Series Shock Absorber | Bilstein 25-268645

    Not Yet Rated!

    Ram 2500 19-23 B8 5160 Series Shock Absorber | Bilstein 25-268645 SKU: bil25-268645

    $270.00
    Fits: Ram 2500 4WD (Rear) Lifted 0-1" (Without Air Leveling Suspension) 2014-2023
    Warranty: Limited Lifetime

    Add Ons

    Fits: Ram 2500/3500 94-12 (Front) 0-2.5 In Lift | Super Duty 05-16 4WD (Front) 4 In Lift
    Fits: Ram 2500 4WD (Front) Lifted 2"-2.5" 2014-2023
    Fits: Ram 3500 4WD (Rear) Lifted 0"-1" 2013-2023
    Fits: Ram 2500 4WD (Rear) Lifted 0"-1" 2014-2018
     
    Sign up with your email to be notified when this product is back in stock!


    Switch out the worn shocks on your Ram 2500/3500 with the Bilstein 25-268645 5160 Series Shock Absorber. Designed as a direct fit solution for lifted trucks and SUVs, Bilstein B8 5160 remote reservoir shock absorbers provide increased cooling capacity and wheel travel compared to traditional shock absorbers, optimizing overall performance. Featuring a monotube design, these shocks ensure consistent, fade-free performance and utilize velocity-sensitive digressive valve settings tuned for each specific application. Each shock is fitted with a unique 360-degree swivel banjo hose fitting for a clean, low-profile installation, enhancing the durability of your vehicle to conquer the harshest off-road environments.



    Features:



    Direct fit solution for lifted trucks and SUVs
    Remote reservoir for increased cooling capacity and wheel travel
    Monotube design for consistent, fade-free performance
    Velocity-sensitive digressive valve settings
    Unique 360-degree swivel banjo hose fitting for clean installation
    Increased overall durability for off-road environments

    Specifications:



    Part Number: 25-268645
    Series: 5160 Series
    [...]

    Switch out the worn shocks on your Ram 2500/3500 with the Bilstein 25-268645 5160 Series Shock Absorber. Designed as a direct fit solution for lifted trucks and SUVs, Bilstein B8 5160 remote reservoir shock absorbers provide increased cooling capacity and wheel travel compared to traditional shock absorbers, optimizing overall performance. Featuring a monotube design, these shocks ensure consistent, fade-free performance and utilize velocity-sensitive digressive valve settings tuned for each specific application. Each shock is fitted with a unique 360-degree swivel banjo hose fitting for a clean, low-profile installation, enhancing the durability of your vehicle to conquer the harshest off-road environments.


    Features:


    • Direct fit solution for lifted trucks and SUVs
    • Remote reservoir for increased cooling capacity and wheel travel
    • Monotube design for consistent, fade-free performance
    • Velocity-sensitive digressive valve settings
    • Unique 360-degree swivel banjo hose fitting for clean installation
    • Increased overall durability for off-road environments

    Specifications:


    • Part Number: 25-268645
    • Series: 5160 Series
    • Position: Rear
    • Quantity Per Vehicle: 2 (Sold Individually)
    • Finish: Zinc Plated
    • Reservoir: Yes
    • Billet Reservoir Clamp Included: Yes
    • Body Design: Smooth Body (Non-Coilover)
    • Body Diameter: 46mm
    • Spring Seat Included: No
    • Adjustable Damping: Non-Adjustable

    Measurements:


    • Collapsed Length (IN): 16.75
    • Extended Length (IN): 24.96
    • Collapsed Length (MM): 425.5
    • Extended Length (MM): 634.0

    Note:


    • 4WD Only; For Rear Lifted Height: 0-1"; Without Air Leveling Suspension
    • Lift height is suggested by manufacturer. Due to various aftermarket suspension systems, it is recommended to take measurements for proper application. A pin-to-eye shock is measured from the base of the stem where the mounting hardware rests to the center of the eyelet. Shock absorbers are sold individually.

    Upgrade your Ram 2500/3500's suspension with the Bilstein 25-268645 5160 Series Shock Absorber for enhanced performance, durability, and handling in any terrain.


    No Questions asked yet!



    Review Ram 2500 19-23 B8 5160 Series Shock Absorber | Bilstein 25-268645
    No Reviews Yet!
    Proposition 65 Warning Information -  P65Warnings.ca.gov