Your Cart (0)
Thumbnail Filmstrip of 6.0 Powerstroke 4-Pin 6-Phase FICM Power Supply Bullet Proof Diesel 90201081_BK Images
Bullet Proof Diesel 6.0 Powerstroke 4-Pin 6-Phase FICM Power Supply (90201081_BK)
Upgrade the most failure-prone part of your 6.0L Powerstroke FICM with the premium Bullet Proof Diesel 4-pin 6-phase power supply. This is a high-quality replacement for the power-supply half of the Fuel Injection Control Module only — you reuse your existing logic board, so no programming or dealer flash is required.
The factory FICM power supply is a well-known weak point on 2003–2007 Super Duty trucks, Excursions, and E-Series vans. When voltage drops below spec, you get hard/cold starts, rough running, lost power, poor fuel economy, and injector stiction. The 6-phase Bullet Proof unit solves this with a completely redesigned board, extra load-sharing circuits, and far better heat management.
Key Features
- 6-phase design — two additional circuits share the workload for greater reliability and longevity versus a 4-phase or OEM board
- User-selectable output: 48V (stock), 53V, or 58V
- Thick, vibration-resistant circuit board with full heat sink
- Military-spec electrical components
- Billet aluminum housing for superior protection and heat dissipation
- O-ringed inspection cover included
- No programming needed
Benefits
Owners typically report faster starts (especially in cold weather), smoother running, better throttle response, improved fuel economy, and reduced injector issues. The extra phases and upgraded construction make this the most popular FICM power supply Bullet Proof Diesel sells.
Fitment
- 2003–2007 Ford F-250/F-350/F-450/F-550 Super Duty (4-pin FICM only)
- 2003–2005 Ford Excursion
- 2003–2010 Ford E-Series
- Also compatible with certain Navistar VT365 / LCF applications (4-pin)
Important: This unit is for 4-pin FICMs only. Installing a 4-pin power supply on a 7-pin logic board (or vice versa) will destroy the entire FICM. Confirm your pin count before ordering. This is the power-supply board and billet cover only — reuse the rest of your original FICM.
Setting the unit to 58V can set a P0611 code. It will not turn on the check-engine light or affect how the truck runs.
A solid, long-term upgrade for any 6.0L that still has its original (or failing) FICM power supply.
Bullet Proof Diesel 6.0 Powerstroke 4-Pin 6-Phase FICM Power Supply (90201081_BK)
Upgrade the most failure-prone part of your 6.0L Powerstroke FICM with the premium Bullet Proof Diesel 4-pin 6-phase power supply. This is a high-quality replacement for the power-supply half of the Fuel Injection Control Module only — you reuse your existing logic board, so no programming or dealer flash is required.
The factory FICM power supply is a well-known weak point on 2003–2007 Super Duty trucks, Excursions, and E-Series vans. When voltage drops below spec, you get hard/cold starts, rough running, lost power, poor fuel economy, and injector stiction. The 6-phase Bullet Proof unit solves this with a completely redesigned board, extra load-sharing circuits, and far better heat management.
Key Features
6-phase design — two additional circuits share the workload for greater reliability and longevity versus a 4-phase or OEM board
User-selectable output: 48V (stock), 53V, or 58V
Thick, vibration-resistant circuit board with full heat sink
Military-spec electrical components
Billet aluminum housing for superior protection and[...]
Bullet Proof Diesel 6.0 Powerstroke 4-Pin 6-Phase FICM Power Supply (90201081_BK)
Upgrade the most failure-prone part of your 6.0L Powerstroke FICM with the premium Bullet Proof Diesel 4-pin 6-phase power supply. This is a high-quality replacement for the power-supply half of the Fuel Injection Control Module only — you reuse your existing logic board, so no programming or dealer flash is required.
The factory FICM power supply is a well-known weak point on 2003–2007 Super Duty trucks, Excursions, and E-Series vans. When voltage drops below spec, you get hard/cold starts, rough running, lost power, poor fuel economy, and injector stiction. The 6-phase Bullet Proof unit solves this with a completely redesigned board, extra load-sharing circuits, and far better heat management.
Key Features
- 6-phase design — two additional circuits share the workload for greater reliability and longevity versus a 4-phase or OEM board
- User-selectable output: 48V (stock), 53V, or 58V
- Thick, vibration-resistant circuit board with full heat sink
- Military-spec electrical components
- Billet aluminum housing for superior protection and heat dissipation
- O-ringed inspection cover included
- No programming needed
Benefits
Owners typically report faster starts (especially in cold weather), smoother running, better throttle response, improved fuel economy, and reduced injector issues. The extra phases and upgraded construction make this the most popular FICM power supply Bullet Proof Diesel sells.
Fitment
- 2003–2007 Ford F-250/F-350/F-450/F-550 Super Duty (4-pin FICM only)
- 2003–2005 Ford Excursion
- 2003–2010 Ford E-Series
- Also compatible with certain Navistar VT365 / LCF applications (4-pin)
Important: This unit is for 4-pin FICMs only. Installing a 4-pin power supply on a 7-pin logic board (or vice versa) will destroy the entire FICM. Confirm your pin count before ordering. This is the power-supply board and billet cover only — reuse the rest of your original FICM.
Setting the unit to 58V can set a P0611 code. It will not turn on the check-engine light or affect how the truck runs.
A solid, long-term upgrade for any 6.0L that still has its original (or failing) FICM power supply.
Fits: 6.0 Powerstroke 2003-2007
Fits: 6.0 Powerstroke 2003-2007
Fits: 6.0 Powerstroke 2003-2007 (W/ 4-Phase FICM)