Diamond T DS0745LS Dual-Sided Single Disc Low Stall Torque Converter for 2007.5–2017 Ram 6.7L Cummins 68RFE
Upgrade the factory converter on a 2007.5–2017 Ram 6.7L Cummins 68RFE with a Diamond T dual-sided single disc unit rated for up to 450 hp. Diamond T remanufactures each converter from its own matched set of original components, then balances and tests it before it leaves the shop.
Key Benefits & Features
- Clutch: Dual sided single disk lockup clutch.
- Cover: Billet cover.
- Power Rating: Rated for up to 450 hp.
- Low Stall: Low stall speed of about 200 rpm below stock.
- Matched-Parts Rebuild: Original components stay together through the rebuild, and marginal parts are replaced.
- Housing Checked to OEM Spec: Housing thickness is measured, and a housing under OEM spec is replaced instead of being machined thin.
- Balanced and Tested: Each converter is computer balanced and quality tested, then pre-charged with fluid to keep the internals from rusting before install.
- Warranty: Lifetime, non-transferable Diamond T warranty against defects in material and workmanship.
Fitment
- 2007.5–2017 Dodge/Ram 2500 and 3500 6.7L Cummins Diesel with the 68RFE automatic
- Part Number: Diamond T DS0745LS
Tech & Installation Notes
- Warranty Terms: Coverage is replacement of the converter only and does not include labor or other parts.
Diamond T DS0745LS Dual-Sided Single Disc Low Stall Torque Converter for 2007.5–2017 Ram 6.7L Cummins 68RFE
Upgrade the factory converter on a 2007.5–2017 Ram 6.7L Cummins 68RFE with a Diamond T dual-sided single disc unit rated for up to 450 hp. Diamond T remanufactures each converter from its own matched set of original components, then balances and tests it before it leaves the shop.
Key Benefits & Features
Clutch: Dual sided single disk lockup clutch.
Cover: Billet cover.
Power Rating: Rated for up to 450 hp.
Low Stall: Low stall speed of about 200 rpm below stock.
Matched-Parts Rebuild: Original components stay together through the rebuild, and marginal parts are replaced.
Housing Checked to OEM Spec: Housing thickness is measured, and a housing under OEM spec is replaced instead of being machined thin.
Balanced and Tested: Each converter is computer balanced and quality tested, then pre-charged with fluid to keep the internals from rusting before install.
Warranty: Lifetime, non-transferable Diamond T warranty against defects in material and workmanship.
Fitment
2007.5–20[...]
Diamond T DS0745LS Dual-Sided Single Disc Low Stall Torque Converter for 2007.5–2017 Ram 6.7L Cummins 68RFE
Upgrade the factory converter on a 2007.5–2017 Ram 6.7L Cummins 68RFE with a Diamond T dual-sided single disc unit rated for up to 450 hp. Diamond T remanufactures each converter from its own matched set of original components, then balances and tests it before it leaves the shop.
Key Benefits & Features
- Clutch: Dual sided single disk lockup clutch.
- Cover: Billet cover.
- Power Rating: Rated for up to 450 hp.
- Low Stall: Low stall speed of about 200 rpm below stock.
- Matched-Parts Rebuild: Original components stay together through the rebuild, and marginal parts are replaced.
- Housing Checked to OEM Spec: Housing thickness is measured, and a housing under OEM spec is replaced instead of being machined thin.
- Balanced and Tested: Each converter is computer balanced and quality tested, then pre-charged with fluid to keep the internals from rusting before install.
- Warranty: Lifetime, non-transferable Diamond T warranty against defects in material and workmanship.
Fitment
- 2007.5–2017 Dodge/Ram 2500 and 3500 6.7L Cummins Diesel with the 68RFE automatic
- Part Number: Diamond T DS0745LS
Tech & Installation Notes
- Warranty Terms: Coverage is replacement of the converter only and does not include labor or other parts.