The Maryland Performance Diesel hot side boot kit replaces the factory intercooler boots between the turbo and the intercooler on 6.7L Powerstroke trucks. The factory boots are a common boost leak point once boost is raised.

MPD uses 5 ply silicone boots with a factory style quick connection that seals on an internal O-ring and bead, held with 304 stainless dual bead clamps. It is designed for factory turbos and high boost use.

• 5 Ply Silicone: Resists ballooning and splitting under boost.
• Factory Style Connection: Quick connect design like the original.
• O-Ring Sealing: Internal O-ring and bead seal the joint.
• Dual Bead Clamps: 304 stainless clamps hold the boots.
• High Boost Ready: Built for factory turbos at raised boost.

Technical Specifications

• Part Number: MPD-67-PSD-15-HSBOOT
• Manufacturer: Maryland Performance Diesel
• Boots: 5 ply silicone
• Clamps: 304 stainless dual bead

Vehicle Fitment & Technical Installation Notes

• Fitment: 2011-2022 Ford 6.7L Powerstroke per our listing. Confirm year with MPD, as some sellers list this kit as 2015-2019.
• Installation Tip: Clean oil residue from the intercooler pipes before installing the boots, and seat each boot fully on its bead before tightening the clamps.