Free Shipping Qualifying Orders Over $199
Secure Checkout
6.7 Powerstroke X4 CARB Compliant Programmer SCT 7015PEO

Thumbnail Filmstrip of 6.7 Powerstroke X4 CARB Compliant Programmer SCT 7015PEO Images

    SCT 7015PEO X4 CARB Compliant Performance Programmer – 2011-2019 Ford 6.7L Powerstroke

    Unlock real horsepower and torque from your 6.7L Powerstroke while staying fully emissions-legal in all 50 states. The SCT 7015PEO X4 is a handheld performance programmer pre-loaded with dyno-proven tunes that deliver noticeable gains in power, throttle response, and drivability—without deleting or impairing any factory emissions equipment.

    Why Choose the SCT X4 CARB Compliant Programmer?

    Your truck left the factory tuned for the average driver. That conservative calibration leaves usable power and responsiveness on the table. The SCT X4 changes that. Simply plug it into the OBD-II port, select a pre-loaded tune (or a custom one), and enjoy a more powerful, more responsive Super Duty in minutes. When you’re done, return to the original factory tune with a few clicks.

    Key Benefits:

    • Immediate gains in horsepower and torque across Performance, Street, and Towing levels
    • Sharper throttle response and improved overall drivability
    • Potential fuel economy improvements under light-load driving (depending on tune and conditions)
    • Full 50-state legal operation with CARB Executive Order D-784-10
    • No emissions equipment deletion or impairment (EGR, DPF, SCR, etc. remain fully functional)

    Features

    • Pre-loaded dyno-proven performance tunes
    • Stores up to 10 custom tunes from an SCT dealer
    • Full-color backlit LCD display with auto-dim and portrait/landscape modes
    • Real-time data monitoring and high-speed data logging (EGT, boost, AFR, and more)
    • Dual analog inputs for additional sensors
    • Reads and clears diagnostic trouble codes (DTCs)
    • User-adjustable parameters (tire size, gear ratio, etc.)
    • Saves and restores the factory tune
    • Compact handheld design with included USB cable and LiveLink software (Windows PC required for updates)

    Fitment

    • Primary: 2011–2019 Ford F-250 / F-350 / F-450 Super Duty 6.7L Powerstroke
    • Also supports select 2014–2020 Ford gas vehicles under additional CARB EO numbers (D-784-11 / D-784-12 / D-784-13)

    Important Notes

    This programmer is CARB EO #D-784-10 approved and legal for sale and use on emissions-controlled vehicles in all 50 states when used according to the manufacturer’s application guide. It will not support or allow deletion or impairment of factory emissions systems. Pre-loaded tunes are designed for mostly stock or lightly modified vehicles (cold air intake and cat-back exhaust typically acceptable). Significant engine or emissions modifications may require custom tuning.

    Give your 6.7L Powerstroke the performance it was capable of from the start—legally and reliably—with the SCT 7015PEO X4.

    Purchase 6.7 Powerstroke X4 CARB Compliant Programmer SCT 7015PEO

    Not Yet Rated!

    6.7 Powerstroke X4 CARB Compliant Programmer SCT 7015PEO SKU: sct7015PEO

    $419.00

    Qualifies for Free Shipping Over $199

    Fits: 6.7 Powerstroke 2011-2019 | Ford Gas Vehicles 2014-2020

    Add-Ons: Select the checkboxes to include items in your cart

    Fits: SCT X4 Programmer
     

    Pay in 4 w/Paypal! Pay in 4 w/Affirm!

    Pay in 4!
    With PayPal or Affirm—available in cart and at checkout.

    Sign up with your email to be notified when this product is back in stock!


    SCT 7015PEO X4 CARB Compliant Performance Programmer – 2011-2019 Ford 6.7L Powerstroke

    Unlock real horsepower and torque from your 6.7L Powerstroke while staying fully emissions-legal in all 50 states. The SCT 7015PEO X4 is a handheld performance programmer pre-loaded with dyno-proven tunes that deliver noticeable gains in power, throttle response, and drivability—without deleting or impairing any factory emissions equipment.

    Why Choose the SCT X4 CARB Compliant Programmer?

    Your truck left the factory tuned for the average driver. That conservative calibration leaves usable power and responsiveness on the table. The SCT X4 changes that. Simply plug it into the OBD-II port, select a pre-loaded tune (or a custom one), and enjoy a more powerful, more responsive Super Duty in minutes. When you’re done, return to the original factory tune with a few clicks.

    Key Benefits:


    Immediate gains in horsepower and torque across Performance, Street, and Towing levels

    Sharper throttle response and improved overall drivability

    Potential fuel economy improvements under light-load driving (depending on tune and conditions)

    Full[...]

    SCT 7015PEO X4 CARB Compliant Performance Programmer – 2011-2019 Ford 6.7L Powerstroke

    Unlock real horsepower and torque from your 6.7L Powerstroke while staying fully emissions-legal in all 50 states. The SCT 7015PEO X4 is a handheld performance programmer pre-loaded with dyno-proven tunes that deliver noticeable gains in power, throttle response, and drivability—without deleting or impairing any factory emissions equipment.

    Why Choose the SCT X4 CARB Compliant Programmer?

    Your truck left the factory tuned for the average driver. That conservative calibration leaves usable power and responsiveness on the table. The SCT X4 changes that. Simply plug it into the OBD-II port, select a pre-loaded tune (or a custom one), and enjoy a more powerful, more responsive Super Duty in minutes. When you’re done, return to the original factory tune with a few clicks.

    Key Benefits:

    • Immediate gains in horsepower and torque across Performance, Street, and Towing levels
    • Sharper throttle response and improved overall drivability
    • Potential fuel economy improvements under light-load driving (depending on tune and conditions)
    • Full 50-state legal operation with CARB Executive Order D-784-10
    • No emissions equipment deletion or impairment (EGR, DPF, SCR, etc. remain fully functional)

    Features

    • Pre-loaded dyno-proven performance tunes
    • Stores up to 10 custom tunes from an SCT dealer
    • Full-color backlit LCD display with auto-dim and portrait/landscape modes
    • Real-time data monitoring and high-speed data logging (EGT, boost, AFR, and more)
    • Dual analog inputs for additional sensors
    • Reads and clears diagnostic trouble codes (DTCs)
    • User-adjustable parameters (tire size, gear ratio, etc.)
    • Saves and restores the factory tune
    • Compact handheld design with included USB cable and LiveLink software (Windows PC required for updates)

    Fitment

    • Primary: 2011–2019 Ford F-250 / F-350 / F-450 Super Duty 6.7L Powerstroke
    • Also supports select 2014–2020 Ford gas vehicles under additional CARB EO numbers (D-784-11 / D-784-12 / D-784-13)

    Important Notes

    This programmer is CARB EO #D-784-10 approved and legal for sale and use on emissions-controlled vehicles in all 50 states when used according to the manufacturer’s application guide. It will not support or allow deletion or impairment of factory emissions systems. Pre-loaded tunes are designed for mostly stock or lightly modified vehicles (cold air intake and cat-back exhaust typically acceptable). Significant engine or emissions modifications may require custom tuning.

    Give your 6.7L Powerstroke the performance it was capable of from the start—legally and reliably—with the SCT 7015PEO X4.

    1 Question asked on 6.7 Powerstroke X4 CARB Compliant Programmer SCT 7015PEO



    Q Kyler • 02/06/2026, 6:10:31 PM does it come with delete tunes
    A 02/06/2026, 7:01:20 PM No.
    Review 6.7 Powerstroke X4 CARB Compliant Programmer SCT 7015PEO
    No Reviews Yet!
    Proposition 65 Warning Information -  P65Warnings.ca.gov