Your Cart (0)
Thumbnail Filmstrip of 2013-2018 6.7L Cummins Cab & Chassis OEM Reman HE351VE Turbo Holset 5326057HX Images
The Holset 5326057HX is a genuine Holset remanufactured HE351VE (Holset model HE300VG) variable geometry turbocharger for 2013-2018 Ram cab and chassis trucks with the 6.7L Cummins. A worn factory VGT turbo shows up as low boost, slow spool, black smoke, oil seepage and over or underboost codes, and a sticking or failed actuator can leave the truck in limp mode.
Holset strips each core, inspects and cleans every part, replaces anything outside OEM spec, and balances the rotating assembly to factory specifications. The turbo ships with an electronic VGT actuator installed, so no actuator calibration is needed. Core required, refundable deposit at checkout.
Key Features & Benefits
- Genuine Holset Reman: Remanufactured by the original turbo supplier to OEM standards.
- Actuator Included: Comes with the electronic VGT actuator, with no calibration required.
- Balanced Rotating Assembly: Balanced to Holset specification for smooth, quiet operation.
- Factory Fit: Bolts in with the factory mounting, oil, coolant and air connections.
Technical Specifications
- Manufacturer: Holset (Cummins Turbo Technologies)
- Part Number / SKU: 5326057HX
- Product Type: Stock replacement turbocharger, remanufactured
- Holset Model: HE300VG (HE351VE)
- Assembly Number: 5501329
- OEM Customer Number: 5327046
- Housing Orientation: Compressor 175, turbine 189
- Truck Compatibility: 2013-2018 Ram 3500, 4500, 5500 cab and chassis
- Engine Platform: 6.7L Cummins
- Core Requirement: Core required, refundable deposit at checkout
- Warranty: 1 year
Vehicle Fitment & Technical Installation Notes
Fits 2013-2018 Ram 3500, 4500 and 5500 cab and chassis trucks with the 6.7L Cummins. Supersedes Holset 5327046HX. Pickups use a different turbo.
Installation Tip: Find the cause of the old turbo's failure before installing the new one. Change the engine oil and filter, check the oil feed and drain lines for restriction, and clean any oil out of the intercooler and boost tubes. Pre-lube the turbo through the oil feed port before the first start. A replacement oil feed line and drain tube kit are available as add-ons if the originals are worn or restricted.
The Holset 5326057HX is a genuine Holset remanufactured HE351VE (Holset model HE300VG) variable geometry turbocharger for 2013-2018 Ram cab and chassis trucks with the 6.7L Cummins. A worn factory VGT turbo shows up as low boost, slow spool, black smoke, oil seepage and over or underboost codes, and a sticking or failed actuator can leave the truck in limp mode.
Holset strips each core, inspects and cleans every part, replaces anything outside OEM spec, and balances the rotating assembly to factory specifications. The turbo ships with an electronic VGT actuator installed, so no actuator calibration is needed. Core required, refundable deposit at checkout.
Key Features & Benefits
Genuine Holset Reman: Remanufactured by the original turbo supplier to OEM standards.
Actuator Included: Comes with the electronic VGT actuator, with no calibration required.
Balanced Rotating Assembly: Balanced to Holset specification for smooth, quiet operation.
Factory Fit: Bolts in with the factory mounting, oil, coolant and air connections.
Technical Specifications
Manufacturer: Holset (Cummins Turbo Technologies)
The Holset 5326057HX is a genuine Holset remanufactured HE351VE (Holset model HE300VG) variable geometry turbocharger for 2013-2018 Ram cab and chassis trucks with the 6.7L Cummins. A worn factory VGT turbo shows up as low boost, slow spool, black smoke, oil seepage and over or underboost codes, and a sticking or failed actuator can leave the truck in limp mode.
Holset strips each core, inspects and cleans every part, replaces anything outside OEM spec, and balances the rotating assembly to factory specifications. The turbo ships with an electronic VGT actuator installed, so no actuator calibration is needed. Core required, refundable deposit at checkout.
Key Features & Benefits
- Genuine Holset Reman: Remanufactured by the original turbo supplier to OEM standards.
- Actuator Included: Comes with the electronic VGT actuator, with no calibration required.
- Balanced Rotating Assembly: Balanced to Holset specification for smooth, quiet operation.
- Factory Fit: Bolts in with the factory mounting, oil, coolant and air connections.
Technical Specifications
- Manufacturer: Holset (Cummins Turbo Technologies)
- Part Number / SKU: 5326057HX
- Product Type: Stock replacement turbocharger, remanufactured
- Holset Model: HE300VG (HE351VE)
- Assembly Number: 5501329
- OEM Customer Number: 5327046
- Housing Orientation: Compressor 175, turbine 189
- Truck Compatibility: 2013-2018 Ram 3500, 4500, 5500 cab and chassis
- Engine Platform: 6.7L Cummins
- Core Requirement: Core required, refundable deposit at checkout
- Warranty: 1 year
Vehicle Fitment & Technical Installation Notes
Fits 2013-2018 Ram 3500, 4500 and 5500 cab and chassis trucks with the 6.7L Cummins. Supersedes Holset 5327046HX. Pickups use a different turbo.
Installation Tip: Find the cause of the old turbo's failure before installing the new one. Change the engine oil and filter, check the oil feed and drain lines for restriction, and clean any oil out of the intercooler and boost tubes. Pre-lube the turbo through the oil feed port before the first start. A replacement oil feed line and drain tube kit are available as add-ons if the originals are worn or restricted.
Fits: 6.7 Cummins 2013-2018 (Pickup)
Fits: 6.7 Cummins 2013-2018 (Pickup)
California Restricted
Fits: 6.7 Cummins 2007.5-2012
Fits: 6.7 Cummins 2007.5-2012
Fits: 6.7 Cummins 2013-2018 (Pickup)
Fits: 6.7 Cummins 2013-2018 (Cab & Chassis)
Fits: 6.7 Cummins 2013-2018 (Cab & Chassis)