The AirDog 901-01-0351-QC is a suction-tube kit for an AirDog pump. It is a 5/8-inch draw straw. The bulkhead goes in a hole drilled in the top of the tank, held with a washer and a jam nut. The pump is not in this box.

You get the tube, 7 feet of 1/2-inch line, and quick-connect fittings for a 3/4-16, a 9/16-18, and a 3/8 NPT port. The II-5G 165 gph system this tube feeds is A7SABF592.

It fits an AirDog install that pulls through a tank-top draw straw.

Fitment

• AirDog fuel pumps
• 5/8-inch draw straw
• Tank-top bulkhead
• 7 feet of 1/2-inch line
• Quick-connect fittings
• Pump not included

Drain the tank before you drill. Seal the bulkhead. Keep the straw off the bottom so it does not suck debris.