Your Cart (0)
Thumbnail Filmstrip of 1999.5-2003 7.3L Powerstroke Intercooler Pipe Kit Atlas 468-9903 Images
The Atlas 468-9903 is a 3-inch intercooler pipe kit for a 1999.5–2003 7.3 Powerstroke. It is the pipes, the boots, and the clamps. The intercooler is not included.
The tubes are mandrel-bent polished stainless and bolt to a stock intercooler or an aftermarket core that still uses the factory connections. Boots and clamps are in the box. A May 1999 truck and a 2001 Excursion both fit this kit. An early-1999 with the small elbow does not.
It fits 1999.5–2003 F-250, F-350, and Excursion trucks.
Fitment
- 1999.5–2003 Ford 7.3L Powerstroke
- F-250, F-350, and Excursion
- 3-inch polished stainless
- Hot and cold pipes
- Boots and clamps included
- Intercooler not included
If only the boots are split, a boot kit is the smaller job. These pipes are the fix when the stock tubes are crushed at the clamp.
The Atlas 468-9903 is a 3-inch intercooler pipe kit for a 1999.5–2003 7.3 Powerstroke. It is the pipes, the boots, and the clamps. The intercooler is not included.
The tubes are mandrel-bent polished stainless and bolt to a stock intercooler or an aftermarket core that still uses the factory connections. Boots and clamps are in the box. A May 1999 truck and a 2001 Excursion both fit this kit. An early-1999 with the small elbow does not.
It fits 1999.5–2003 F-250, F-350, and Excursion trucks.
Fitment
- 1999.5–2003 Ford 7.3L Powerstroke
- F-250, F-350, and Excursion
- 3-inch polished stainless
- Hot and cold pipes
- Boots and clamps included
- Intercooler not included
If only the boots are split, a boot kit is the smaller job. These pipes are the fix when the stock tubes are crushed at the clamp.
Q
Rylan Wilkinson • 07/01/2025, 6:29:51 PM
Will these fit with a stock intercooler?
A
07/10/2025, 3:25:06 PM
Yes
Q
Seth Sollenberger • 01/08/2026, 4:08:44 PM
Will these hold up to high psi? I am struggling with crushing my stock ones with the clamp.
A
01/12/2026, 2:01:23 PM
Never have reports from these crushing.
Q
brett • 02/02/2026, 6:01:47 PM
My truck is a 5/99 production date, will these fit?
A
02/02/2026, 7:08:23 PM
Yes.
Q
Bob Snavely • 02/18/2026, 6:08:34 AM
will this set fit my 2001 Excursion 7.3
A
02/18/2026, 5:27:58 PM
Yes.
Q
Caleb • 07/05/2026, 6:27:08 PM
Does it come with the pipes, boots and clamps?
A
07/07/2026, 12:53:47 PM
Exactly as pictured.
Currently Viewing Reviews with a rating of 4. Click here to reset.
4.62/5 Stars out of 8 Reviews
0
0
1
1
6
Jason (Pensacola) | June 29th, 2024
2003 7.3 diesel with KC300 stage 1 turbo, kit fits well with exception of hot pipe that goes by power steering pump. Factory pipes actually fit better and have better lip for holding boots. Kit pipe is closer to pump and I blew boot off first test drive. Otherwise it looks stronger and cleaner than factory pipe and boots, not sure how it could "flow better".
Proposition 65 Warning Information -
P65Warnings.ca.gov
California Restricted
Fits: 7.3 Powerstroke 1999.5-2003
California Restricted
Fits: 7.3 Powerstroke 1999.5-2003
California Restricted
Fits: 7.3 Powerstroke 1999.5-2003
California Restricted
Fits: 7.3 Powerstroke 1999-2003