The Sinister SD-INTRPIPE-7-3-COLD is the cold-side charge pipe for a 1999.5–2003 7.3 Powerstroke. It is the passenger-side tube from the intercooler to the intake. The hot side is not included. The full kit is SD-INTRPIPE-7-3-KIT.
The pipe is mandrel-bent 6061 aluminum in Sinister Blue. Two 4-ply silicone boots and four stainless spring clamps are in the box. Sinister rates the boots to a 400 psi burst. An early-1999 truck uses the smaller elbow and will not take this pipe.
It fits 1999.5–2003 Super Duty 7.3 trucks.
Fitment
- 1999.5–2003 Ford 7.3L Powerstroke
- Cold side only
- 6061 aluminum, Sinister Blue
- Two boots, four spring clamps
- 400 psi burst rating
- Hot pipe not included
If both tubes are crushed, the kit with both sides is SD-INTRPIPE-7-3-KIT. The hot-side pipe is SD-INTRPIPE-7-3-HOT.
The Sinister SD-INTRPIPE-7-3-COLD is the cold-side charge pipe for a 1999.5–2003 7.3 Powerstroke. It is the passenger-side tube from the intercooler to the intake. The hot side is not included. The full kit is SD-INTRPIPE-7-3-KIT.
The pipe is mandrel-bent 6061 aluminum in Sinister Blue. Two 4-ply silicone boots and four stainless spring clamps are in the box. Sinister rates the boots to a 400 psi burst. An early-1999 truck uses the smaller elbow and will not take this pipe.
It fits 1999.5–2003 Super Duty 7.3 trucks.
Fitment
- 1999.5–2003 Ford 7.3L Powerstroke
- Cold side only
- 6061 aluminum, Sinister Blue
- Two boots, four spring clamps
- 400 psi burst rating
- Hot pipe not included
If both tubes are crushed, the kit with both sides is SD-INTRPIPE-7-3-KIT. The hot-side pipe is SD-INTRPIPE-7-3-HOT.
Sinister Diesel SD-INTRPIPE-7.3-COLD Installation Instructions