Free Shipping Qualifying Orders Over $199 *
Secure Checkout
Shop by your truck
1999.5-2003 7.3L Powerstroke Intercooler Pipe Kit Atlas 468-9903

Thumbnail Filmstrip of 1999.5-2003 7.3L Powerstroke Intercooler Pipe Kit Atlas 468-9903 Images

    The Atlas 468-9903 is a 3-inch intercooler pipe kit for a 1999.5–2003 7.3 Powerstroke. It is the pipes, the boots, and the clamps. The intercooler is not included.

    The tubes are mandrel-bent polished stainless and bolt to a stock intercooler or an aftermarket core that still uses the factory connections. Boots and clamps are in the box. A May 1999 truck and a 2001 Excursion both fit this kit. An early-1999 with the small elbow does not.

    It fits 1999.5–2003 F-250, F-350, and Excursion trucks.

    Fitment

    • 1999.5–2003 Ford 7.3L Powerstroke
    • F-250, F-350, and Excursion
    • 3-inch polished stainless
    • Hot and cold pipes
    • Boots and clamps included
    • Intercooler not included

    If only the boots are split, a boot kit is the smaller job. These pipes are the fix when the stock tubes are crushed at the clamp.

    Purchase 1999.5-2003 7.3L Powerstroke Intercooler Pipe Kit Atlas 468-9903

    Rated 4.62/5 (8 reviews)

    Usually Ships in 24-48 Hours

    1999.5-2003 7.3L Powerstroke Intercooler Pipe Kit Atlas 468-9903

    SKU: atl468-9903
    $240.00

    Qualifies for Free Shipping Over $199



    Fits: 7.3 Powerstroke 1999.5-2003
     
    Free shipping on orders over $199**Contiguous US only
    Most in-stock orders ship in 1–2 business days
    Diesel experts: 615-962-8291
    Fits these vehicles
    • 1999 Ford 7.3L Powerstroke
    • Early 1999 Ford 7.3L Powerstroke
    • 2000 Ford 7.3L Powerstroke
    • 2001 Ford 7.3L Powerstroke
    • 2002 Ford 7.3L Powerstroke
    • 2003 Ford 7.3L Powerstroke

    The Atlas 468-9903 is a 3-inch intercooler pipe kit for a 1999.5–2003 7.3 Powerstroke. It is the pipes, the boots, and the clamps. The intercooler is not included.

    The tubes are mandrel-bent polished stainless and bolt to a stock intercooler or an aftermarket core that still uses the factory connections. Boots and clamps are in the box. A May 1999 truck and a 2001 Excursion both fit this kit. An early-1999 with the small elbow does not.

    It fits 1999.5–2003 F-250, F-350, and Excursion trucks.

    Fitment

    • 1999.5–2003 Ford 7.3L Powerstroke
    • F-250, F-350, and Excursion
    • 3-inch polished stainless
    • Hot and cold pipes
    • Boots and clamps included
    • Intercooler not included

    If only the boots are split, a boot kit is the smaller job. These pipes are the fix when the stock tubes are crushed at the clamp.

    5 Questions asked on 1999.5-2003 7.3L Powerstroke Intercooler Pipe Kit Atlas 468-9903 •



    Q Rylan Wilkinson • 07/01/2025, 6:29:51 PM Will these fit with a stock intercooler?
    A 07/10/2025, 3:25:06 PM Yes
    Q Seth Sollenberger • 01/08/2026, 4:08:44 PM Will these hold up to high psi? I am struggling with crushing my stock ones with the clamp.
    A 01/12/2026, 2:01:23 PM Never have reports from these crushing.
    Q brett • 02/02/2026, 6:01:47 PM My truck is a 5/99 production date, will these fit?
    A 02/02/2026, 7:08:23 PM Yes.
    Q Bob Snavely • 02/18/2026, 6:08:34 AM will this set fit my 2001 Excursion 7.3
    A 02/18/2026, 5:27:58 PM Yes.
    Q Caleb • 07/05/2026, 6:27:08 PM Does it come with the pipes, boots and clamps?
    A 07/07/2026, 12:53:47 PM Exactly as pictured.
    Review 1999.5-2003 7.3L Powerstroke Intercooler Pipe Kit Atlas 468-9903
    Currently Viewing Reviews with a rating of 5. Click here to reset.
    4.62/5 Stars out of 8 Reviews
    1
    0
    2
    0
    3
    1
    4
    1
    5
    6
    Pages 1   2
    Verified Buyer
    Holy Charge pipe Batman !!!
    5
    Robert Smith (Mobile Alabama) | February 26th, 2025
    I had the stereotypical hole rubbed in my old charge pipe on the driver side. Purchased the stainless steel atlas complete kit to restore my boost level. They also upgraded the aesthetics under the hood. Polished stainless and new boots and clamps look so much better and it runs a lot better. And thank you for the military discount.!!!
    DIY
    5
    Tj Dolan (Ogden UT) | April 8th, 2024
    This is a good product I�m my opinion, the company acknowledges the problem with the pipe being close to the power steering pump and made a simple change to give it enough clearance and doesn�t touch, the boots are well made and everything installed easily and fit just as good as stock. Unless you are looking for the custom paint look these look good polished on there own.
    This is the kit to buy
    5
    Brandon Blackwell (Wetumpka) | September 12th, 2023
    There�s no reason to look any more. These are the only boots that makes sense to buy. Boots, clamps and pipes are all as good if not better than oem and the best price online from a reputable company
    Review
    5
    Joe (Oregon) | January 23rd, 2023
    Installed them on my 2002 super duty. My old pipes had holes work in them. Nice easy install.
    Best bang for your buck
    5
    Ben Johnson (Los Angeles) | December 31st, 2022
    If you are looking to get rid of the crappy stock pipes these are the best option. They don�t cost an arm and a leg like all the other aftermarket pipes, which aren�t even pre-formed to go around the power steering pump. I had no issues at all and the hot side pipe doesn�t even come close to the ps pump. I had an issue with the stock hot side pipe blowing off� not these, these pipes have stated in place with no issues at all.
    Proposition 65 Warning Information -  P65Warnings.ca.gov