Your Cart (0)
Thumbnail Filmstrip of 1999.5-2003 7.3L Powerstroke Intercooler Boot and Clamp Kit BD 1047030 Images
The BD 1047030 is the intercooler boot and clamp kit for a 1999.5–2003 7.3 Powerstroke. It is the boots only. The pipes are not included.
The boots are 4-ply Nomex silicone with a fluorosilicone liner, so oil mist does not eat the rubber. BD rates them past 100 psi. The clamps are stainless spring T-bolts, over 400 pounds of clamp force, and they stay tight through a heat cycle. The kit covers the intercooler joints, the spider boots, and the plenum boots. It fits a stock cooler or an aftermarket setup that still uses these boot sizes. An early-1999 truck does not use this layout.
It fits 1999.5–2003 F-250 and F-350 trucks.
Fitment
- 1999.5–2003 Ford 7.3L Powerstroke
- F-250 and F-350
- 4-ply Nomex silicone, fluorosilicone lined
- Intercooler, spider, and plenum boots
- Stainless spring clamps
- Pipes not included
Closing: A split factory boot is a boost leak. If the aluminum tubes are crushed, the pipe kit is a different part.
The BD 1047030 is the intercooler boot and clamp kit for a 1999.5–2003 7.3 Powerstroke. It is the boots only. The pipes are not included.
The boots are 4-ply Nomex silicone with a fluorosilicone liner, so oil mist does not eat the rubber. BD rates them past 100 psi. The clamps are stainless spring T-bolts, over 400 pounds of clamp force, and they stay tight through a heat cycle. The kit covers the intercooler joints, the spider boots, and the plenum boots. It fits a stock cooler or an aftermarket setup that still uses these boot sizes. An early-1999 truck does not use this layout.
It fits 1999.5–2003 F-250 and F-350 trucks.
Fitment
- 1999.5–2003 Ford 7.3L Powerstroke
- F-250 and F-350
- 4-ply Nomex silicone, fluorosilicone lined
- Intercooler, spider, and plenum boots
- Stainless spring clamps
- Pipes not included
Closing: A split factory boot is a boost leak. If the aluminum tubes are crushed, the pipe kit is a different part.
5/5 Stars out of 2 Reviews
0
0
0
0
2
Francisco tamez (Little river south Carolina) | February 22nd, 2022
Great product easy to install great quality and like the heavy duty boot clamps
Matthew Poe (Greenville, Ohio) | April 30th, 2021
Just recently overhauled/upgraded the top end and entire fuel system on my 270k mile 7.3... Thought I would get by without new boots, nope... Now that I am building 35 psi stock boots will not stay on at the spider, especially old oilsoaked slippery ones. These BD boots came to me recommended by Cody and they are excellent imo, best ones out there. I have only done my spider to tubes so far and had one blow off the tube end. Just make sure you tighten that end down as far as you can without crushing the tube and yer good to go. Have not had it blow off again since. Great product and the whole team at FFD is awesome! Thanx
Proposition 65 Warning Information -
P65Warnings.ca.gov
Fits: 7.3 Powerstroke 1999.5-2003
Fits: 7.3|6.0 Powerstroke 1999-2007
Fits: 7.3 Powerstroke 1999.5-2003
Fits: 7.3 Powerstroke 1999.5-2003
Fits: 7.3 Powerstroke 1999-2003