The FASS Titanium Signature Series TSD02100G is a complete electric lift pump and filtration system for the first-generation 5.9L 12-valve Cummins. It replaces the factory mechanical transfer pump and feeds the VE injection pump a steady supply of clean, low-pressure fuel.

Rated at 100 gallons per hour, this kit is sized for stock trucks up to roughly 600 horsepower. Water separation and particulate filtration come built in, along with air and vapor removal that helps protect the injection pump and injectors.

• 100 GPH Flow: Sized for stock to 600 HP builds on the 12-valve VE platform.
• Built-In Filtration: Water separator and particulate filter clean fuel before it reaches the VE pump.
• Air and Vapor Removal: Separated air and vapor are returned to the tank instead of sent to the engine.
• Bed Bolt Mounting: Bracket mounts using a factory bed bolt for a simple install.
• Gauge and Heater Ports: Dedicated gauge port plus heater ports for optional add-ons.

Technical Specifications

• Part Number: TSD02100G (TS-D02-100G)
• Flow Rate: 100 GPH
• Operating Pressure: Approximately 8-10 PSI
• Recommended Use: Stock to 600 HP
• Fuel Ports: 1/2 inch
• Core Requirement: No core required
• Warranty: 1 year from manufacture date, extended to a limited lifetime warranty when registered with FASS within 30 days of purchase from an authorized dealer

Vehicle Fitment & Technical Installation Notes

• Fitment: 1989-1993 Dodge Ram 250/350 with the 5.9L 12-valve Cummins and Bosch VE rotary injection pump
• Installation Tip: FASS recommends lubricating the bed bolt with WD-40 before you start, since the mounting bracket uses that bolt.