Bilstein B6 4600 Series Rear Shock Absorber (24-185325)
Upgrade your Super Duty’s ride with the Bilstein B6 4600 Series rear shock absorber. This direct-fit monotube damper is engineered specifically for stock-height 1999–2016 Ford F-250 and F-350 Super Duty 2WD trucks, delivering sharper control, reduced body roll, and a more composed feel whether you’re commuting, towing, or hauling.
Key Features & Benefits
- 46mm monotube gas-pressure design – Provides consistent, fade-free damping under load and heat, far superior to typical twin-tube factory shocks.
- Velocity-sensitive digressive valving – Instantly adapts to changing road conditions for improved comfort on the highway and better control over bumps, potholes, and uneven surfaces.
- Application-tuned for Super Duty – Optimized specifically for the weight and dynamics of F-250/F-350 trucks to enhance handling, stability, and ride quality without a harsh feel.
- Direct OE replacement – Bolts into factory mounting locations using original springs and hardware. No modifications required.
- Stock height only – Maintains factory ride height (0" lift).
- Durable construction – Yellow painted finish with protective blue straight dust boot for long service life.
- Sold individually – Two required for a complete rear axle set.
- Limited lifetime warranty from Bilstein.
Fitment
- 1999–2016 Ford F-250 Super Duty 2WD
- 1999–2016 Ford F-350 Super Duty 2WD (including many chassis cab configurations)
- Rear position
- Stock height / standard suspension
- Single rear wheel applications
Note: Verify 2WD and stock ride height before ordering. Not intended for lifted vehicles or 4WD models (different part numbers apply).
Why Choose the Bilstein B6 4600?
Factory shocks on Super Duties wear out and lose control, especially under the weight of a Power Stroke diesel, toolboxes, or a trailer. The B6 4600 restores (and improves on) factory damping with Bilstein’s proven monotube technology. Expect tighter handling, better tire contact, less sway when towing, and a more confident everyday drive—without sacrificing the comfort that makes these trucks practical daily drivers.
Part Number: 24-185325 Series: Bilstein B6 4600 Position: Rear Finish: Yellow paint with blue boot
Transform the way your Super Duty rides and handles. Order the Bilstein 24-185325 today for a noticeable upgrade that lasts.
Bilstein B6 4600 Series Rear Shock Absorber (24-185325)
Upgrade your Super Duty’s ride with the Bilstein B6 4600 Series rear shock absorber. This direct-fit monotube damper is engineered specifically for stock-height 1999–2016 Ford F-250 and F-350 Super Duty 2WD trucks, delivering sharper control, reduced body roll, and a more composed feel whether you’re commuting, towing, or hauling.
Key Features & Benefits
46mm monotube gas-pressure design – Provides consistent, fade-free damping under load and heat, far superior to typical twin-tube factory shocks.
Velocity-sensitive digressive valving – Instantly adapts to changing road conditions for improved comfort on the highway and better control over bumps, potholes, and uneven surfaces.
Application-tuned for Super Duty – Optimized specifically for the weight and dynamics of F-250/F-350 trucks to enhance handling, stability, and ride quality without a harsh feel.
Direct OE replacement – Bolts into factory mounting locations using original springs and hardware. No modifications required.
Stock height only – Maintains factory ride height (0" lift).
Bilstein B6 4600 Series Rear Shock Absorber (24-185325)
Upgrade your Super Duty’s ride with the Bilstein B6 4600 Series rear shock absorber. This direct-fit monotube damper is engineered specifically for stock-height 1999–2016 Ford F-250 and F-350 Super Duty 2WD trucks, delivering sharper control, reduced body roll, and a more composed feel whether you’re commuting, towing, or hauling.
Key Features & Benefits
- 46mm monotube gas-pressure design – Provides consistent, fade-free damping under load and heat, far superior to typical twin-tube factory shocks.
- Velocity-sensitive digressive valving – Instantly adapts to changing road conditions for improved comfort on the highway and better control over bumps, potholes, and uneven surfaces.
- Application-tuned for Super Duty – Optimized specifically for the weight and dynamics of F-250/F-350 trucks to enhance handling, stability, and ride quality without a harsh feel.
- Direct OE replacement – Bolts into factory mounting locations using original springs and hardware. No modifications required.
- Stock height only – Maintains factory ride height (0" lift).
- Durable construction – Yellow painted finish with protective blue straight dust boot for long service life.
- Sold individually – Two required for a complete rear axle set.
- Limited lifetime warranty from Bilstein.
Fitment
- 1999–2016 Ford F-250 Super Duty 2WD
- 1999–2016 Ford F-350 Super Duty 2WD (including many chassis cab configurations)
- Rear position
- Stock height / standard suspension
- Single rear wheel applications
Note: Verify 2WD and stock ride height before ordering. Not intended for lifted vehicles or 4WD models (different part numbers apply).
Why Choose the Bilstein B6 4600?
Factory shocks on Super Duties wear out and lose control, especially under the weight of a Power Stroke diesel, toolboxes, or a trailer. The B6 4600 restores (and improves on) factory damping with Bilstein’s proven monotube technology. Expect tighter handling, better tire contact, less sway when towing, and a more confident everyday drive—without sacrificing the comfort that makes these trucks practical daily drivers.
Part Number: 24-185325 Series: Bilstein B6 4600 Position: Rear Finish: Yellow paint with blue boot
Transform the way your Super Duty rides and handles. Order the Bilstein 24-185325 today for a noticeable upgrade that lasts.