Your Cart (0)
Thumbnail Filmstrip of 6.7 Cummins PowerFlo Lift Pump Fleece 34562 Images
FPE-34562
Tags:
The Fleece PowerFlo Lift Pump is a direct OEM in-tank replacement that retains the factory water-in-fuel sensor, factory fuel heater, and factory fuel lines. It installs in less than half the time of other high flow lift pumps and is capable of supporting up to 800 hp. The PowerFlo Lift Pump has two OEM quality gerotor pumps that increase flow capacity and reliability. It also has an active fill bucket that eliminates the need for tank sumps, draw straws, additional air filtration, and the ¼ tank issues typically encountered when seeking a higher flow lift pump. The PowerFlo Lift Pump is also aftermarket capable, making it the perfect choice for your engine’s needs.
• Installs in less than half the time of other high flow lift pumps
• Supports up to 800 hp
• Has two OEM quality gerotor pumps that increase flow capacity and reliability
• Aftermarket capable
Application Notes:
- Operating Pressure: 18-20 psi at idle
- For MY 2020 and up; this pump will not work with the factory installed 50-gallon fuel tank option.
- Not for use with cab & chassis applications
- Reference our fitment data for use in Titan and S&B aftermarket fuel tanks.
- PowerFlo lift pumps are validated for useage with up to 20% biodiesel.
- Protected under US Trademark Reg. No. 6,878,860
The Fleece PowerFlo Lift Pump is a direct OEM in-tank replacement that retains the factory water-in-fuel sensor, factory fuel heater, and factory fuel lines. It installs in less than half the time of other high flow lift pumps and is capable of supporting up to 800 hp. The PowerFlo Lift Pump has two OEM quality gerotor pumps that increase flow capacity and reliability. It also has an active fill bucket that eliminates the need for tank sumps, draw straws, additional air filtration, and the ¼ tank issues typically encountered when seeking a higher flow lift pump. The PowerFlo Lift Pump is also aftermarket capable, making it the perfect choice for your engine’s needs.
• Installs in less than half the time of other high flow lift pumps
• Supports up to 800 hp
• Has two OEM quality gerotor pumps that increase flow capacity and reliability
• Aftermarket capable
Application Notes:
Operating Pressure: 18-20 psi at idle
For MY 2020 and up; this pump will not work with the factory installed 50-gallon fuel tank option.
Not for use with cab & chassis applications
Reference our fitment data for use in Titan and S&B aftermarket fuel [...]
The Fleece PowerFlo Lift Pump is a direct OEM in-tank replacement that retains the factory water-in-fuel sensor, factory fuel heater, and factory fuel lines. It installs in less than half the time of other high flow lift pumps and is capable of supporting up to 800 hp. The PowerFlo Lift Pump has two OEM quality gerotor pumps that increase flow capacity and reliability. It also has an active fill bucket that eliminates the need for tank sumps, draw straws, additional air filtration, and the ¼ tank issues typically encountered when seeking a higher flow lift pump. The PowerFlo Lift Pump is also aftermarket capable, making it the perfect choice for your engine’s needs.
• Installs in less than half the time of other high flow lift pumps
• Supports up to 800 hp
• Has two OEM quality gerotor pumps that increase flow capacity and reliability
• Aftermarket capable
Application Notes:
- Operating Pressure: 18-20 psi at idle
- For MY 2020 and up; this pump will not work with the factory installed 50-gallon fuel tank option.
- Not for use with cab & chassis applications
- Reference our fitment data for use in Titan and S&B aftermarket fuel tanks.
- PowerFlo lift pumps are validated for useage with up to 20% biodiesel.
- Protected under US Trademark Reg. No. 6,878,860
Fits: Cummins 94-12|Duramax 01-12
Fits: 5.9|6.7 Cummins 1998.5-2013
Fits: AFE DFS780 Fuel Systems
Fits: For Use With Fass Titanium & Titanium Signature Series Fuel Pumps
Fits: For Fass Fuel Systems (Use For Dual Heater Or As Replacement)
Fits: 5.9/6.7 Cummins 1998.5-2013